552047
13
Zoom out
Zoom in
Previous page
1/20
Next page
13
12/2011
6.
S
TARTING A
P
ROGRAM
Cycle Table
Program
Cycle Selection In-
formation
Description of
Cycle
Detergent
Pre/main
Running
Time
(Min.)
Energy
(kWh)
Water
(l)
Intensive
For the heaviest soiled
loads, such as pots,
pans, casserole dishes
and dishes that have
been sitting with dried
food on them for a
while.
Pre-wash
Main wash (60°C)
Rinse
Rinse2
Hot rinse
Drying
5/25 g
(or Tablets w/o
the addition of
rinse aid)
180 1.30 16
Normal
(*EN 50242)
For normally soiled
loads, such as pots,
plates, glasses and
lightly soiled pans,
standard daily cycle.
Pre-wash Rinse
Main wash (46°C)
Rinse
Hot rinse
Drying
5/25 g
(or Tablets w/o
the addition of
rinse aid)
162 1.03 13
Rapid
A shorter wash for
lightly soiled loads that
do not need drying.
Main wash (40°C)
Hot rinse
15 g 39 0.50 7
NOTE: *EN 50242: this program is the test cycle.
The information for comparability test in accordance with EN 50242, as follows:
- Capacity: 12 settings
- Position upper basket: upper wheels on rails
- Rinse aid setting: 5
- The power consumption: off-mode 0.39 W
left-on mode: 0.50 W
Starting a Cycle
- Draw out the lower and upper basket, load the dishes and push them back. It is commended to
load the lower basket first, then the upper one (see section “Loading the Baskets”).
- Pour in the detergent (see section “Salt, Detergent and Rinse Aid”).
- Insert the plug into the socket. The power supply is 220-240 VAC /50 HZ, the specification of the
socket is 10A 250VAC. Make sure that the water supply is turned on to full pressure.
- Close the door, press the ON/OFF button and the ON/OFF lamp will turn on.
- Press the program button, the program will be changed in the following direction:
Intensive>Normal>Rapid
If a program is selected, the response lamp will light.
- Then press the Start/Pause button, the dishwasher begins to start.
NOTE: A click could be heard when the door is closed perfectly.
Program Change
Premise:
- A cycle that is underway can only be modified if it has only been running for a short time. Otherwise
the detergent may have already been released and the appliance may have already drained the
wash water. If this is the case, the detergent dispenser must be refilled (see section "Fill in the De-
tergent").
- Pls. press the on/off button to cancel the program, press the on/off button to restart the machine,
select the new program and press the start/pause button.
- The program lamps shows the state of the dishwasher:
a) all program lamps off_ _ _ _ _ _ _ _ _ _ _ _ _ _ _program finished
b) one of the program lamp on_ _ _ _ _ _ _ _ _ _ _ _cycle running
c) one of the program lamp blinking_ _ _ _ _ _ _ _ _ _pause
NOTE: If you open the door when washing, the machine pauses and warning alarm rings.
When you close the door, the machine will keep on working after 10 seconds.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann GSP 5703 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann GSP 5703 in the language / languages: English as an attachment in your email.

The manual is 1,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bomann GSP 5703

Bomann GSP 5703 User Manual - German - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info