688000

Bomann EK 6021 Manual

22
Zoom out
Zoom in
Previous page
1/58
Next page
EK6021CB_IM 02.08.18
22
The Timer
The appliance including heating can be time-controlled via
the timer. Prerequisite for the correct operation of the timer
is the setting of the current time and day of the week.
• You can set a maximum of 23 hours and 50 minutes in
advance.
• The time setting is done in 10-minute increments.
• You may program up to 10 different timer settings.
• Each timer setting includes its own switch-on time,
switch-off time and temperature setting.
• A setting can be programmed for any day of the week or
for several days.
• If you want, you may only program a switch-off time dur-
ing operation and ignore the entry of the switch-on time.
If the switch-off time is meant to be the next day, remem-
ber to adjust the day of the week when programming.
• Even if the appliance is disconnected from the mains,
the timer settings will be preserved.
Display Timer Settings
1. Press the TIMER SET button. The number for the rst 
setting ashes in the display and “ON” lights up. 
2. Press the
or button to display the switch-on times of
the 10 timer settings.
3. Press the button in order to switch to the switch-off
time. “OFF” will appear on the display.
4. Use the or button to display the switch-off times.
5. To clear a displayed setting, press the C button.
Programming the Timer
NOTE:
If you have accidentally made a wrong selection during
timer programming, exit the menu by pressing the OK
button and start again.
1. Select setting number
1) Press the TIMER SET button. The display of the
timer setting number starts ashing. 
2) Use the
or button to select another setting
number.
3) Press the TIMER SET button again to conrm the 
selection.
2. Weekday(s) selection
1) The arrow
 and a weekday will be ashing. Use the 
or button to select a weekday.
2) Press the button to activate the weekday. The
arrow  beside the weekday is ashing.
3) Press the TIMER SET button to conrm the selection.  
4) If you want to deactivate a weekday, press the
button, while the arrow beside the weekday is
ashing.
3. Setting the start time
(“ON” will light up in the display)
1) The hour display starts ashing. 
Use the
or button to set the hour.
2) Press the TIMER SET button to conrm the selection. 
3) The minute display starts ashing. 
Use the or button to set the minute.
4) Press the TIMER SET button to conrm the selection. 
4. Setting the switch-off time
(“OFF” will light up in the display)
1) The hour display starts ashing. 
Use the
or button to set the hour.
2) Press the TIMER SET button to conrm the selection. 
3) The minute display starts ashing. 
Use the or button to set the minute.
4) Press the TIMER SET button to conrm the selection. 
5. Setting the base temperature for the heating
NOTE:
For technical reasons, the current weekday is dis-
played again in this menu item.
1) The temperature display starts ashing. Use the 
or
button to set the base temperature for the heater.
2) Press the TIMER SET button to conrm the selection. 
Activating / Deactivating the Timer
IMPORTANT NOTE:
• In the event of a power failure, all timer settings will be
preserved. However, the appliance will be reset to the
basic settings.
• For safety reasons, the heating will be switched off.
WARNING: Fire hazard!
• Before switching on the timer, check the settings of
the current weekday, the current time and the timer
settings.
• Always set the start time in such a way that the appli-
ance is under proper supervision during operation.
1. Use the 900 W / 1800 W button to set the desired heating
power. Alternatively, you may also use the IC button to
select the adaptive start control function of the heater.
2. Use the DIMMER button to set the intensity of the
ames you wish to have at the start time.
3. If you want the lighting to additionally switch on at the
start time, select it now with the BACK-LIGHT button.
4. By using the TIMER ON / OFF button you switch the
timer on or off.
NOTE:
• If the timer is activated, the
symbol will appear in
the display.
• In addition, the display will show the symbols for the
intensity of the ames and for the heating, provided 
this it has been switched on.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann EK 6021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann EK 6021 in the language / languages: English, German, French, Polish, Spanish as an attachment in your email.

The manual is 2,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info