Manual Bomann EK 6021 (page 21 of 58) (English, German, French, Polish, Spanish)

688000

Zoom out

Zoom in

1/58

EK6021CB_IM 02.08.18

Operation

CAUTION:

Do not switch on the appliance until it has been properly

installed!

NOTE:

• The operation can partly be done via the control panel

of the appliance.

• To set the timer programming, use the remote control.

• Each operating step will be acknowledged by a signal

tone.

• When pressing a wrong button, you will hear two short

beeps.

• After switching on the appliance, the display behind the

glass front becomes visible. For a better ambience, the

display will switch off approx. 20 seconds after each

operation. Press any button to reveal the display again.

Switching on the Appliance

Set the power switch to position I. The appliance is in

Standby. The

symbol lights up in the display.

Basic Setting of the Appliance

After switching on the appliance via the power switch, it will

be in the following basic setting:

- Weekday = SUN (Sunday)

- Display of the current room temperature

- Time =

- Intensity of the ames = high

- Lighting BACKLIGHT = off

- Base temperature for heating =

- Heating = off

- Timer = off

NOTE:

• Even in the event of a power failure, the appliance is

reset to this basic setting.

• For safety reasons, the appliance will always start

without heating.

Close Operation of the Appliance

• You can switch on the appliance on the control panel by

briey pressing the I / O button. The basic setting of the

appliance will become visible in the display.

• If you want to change the intensity of the ames, press

the I / O button for more than 3 seconds.

• You may turn on the lighting by pressing the BACKLIGHT

button. Pressing this button repeatedly, will change the

colours. There are 7 different colour variants.

• Press the POWER button once to activate the heating

power for 900 W. Press the POWER button a second

time to activate the heating power for 1800 W. Pressing

the button a third time will switch off the heating.

The control lamps above the button are displaying the

corresponding status.

NOTE:

The heater and the fan will not be switched on by the

appliance until the room temperature is lower than the

base temperature for the heater (see basic setting).

You can increase the base temperature for the heating

via the remote control.

Operate of the Appliance from the Distance

1. Switch the appliance on by pressing the ON / OFF button

on the remote control. The basic setting of the appliance

will become visible in the display.

2. Press the or button to set the base temperature for

the heater. Possible temperature range: Between 15 °C

and 30 °C. Note that the base temperature must be

higher than the current room temperature. If the room

temperature falls below the set base temperature, the

heating will switch on automatically.

3. Use the button 900 W / 1800 W to select the heating

power:

Button

Appearance

in the display

Heating power

Press 1 ×

900 W

Press 2 ×

1800 W

Press 3 × off

4. If you want to use the heater’s adaptive start control

function, press the IC button. “AUTO” will appear on the

display. Based on the room temperature and the set

temperature the appliance will automatically adjust the

heating power.

5. Press the BACK-LIGHT button to select one of 7 colour

variants.

6. Press the DIMMER button if you want to change the

intensity of the ames.

Setting the Current Day of the Week and the Time

1. Press the DATE / TIME button. The arrow

and a

weekday will be ashing. Use the or button to

select a weekday. Press the DATE / TIME button again

to conrm the weekday.

2. The hour display starts ashing. Use the

or button

to set the current hour. Press the DATE / TIME button

again to conrm the hour.

3. The minute display starts ashing. Use the or

button to set the current minute.

4. Press the OK button to exit the menu.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bomann EK 6021 in the language / languages: English, German, French, Polish, Spanish as an attachment in your email.

The manual is 2,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bomann EK 6021 Manual

Product: