688073
8
Zoom out
Zoom in
Previous page
1/20
Next page
The
appliance is suitable for three
current (
220-240/380-415V 3N~
50
The appliance can be adjusted for single
current by a respective bypass on the terminal
block, based on the circuit diagram below. Select
a suitable cord as
mains cable, considering the
connection type and nominal power of the oven.
Fix the mains cable in the tension relief.
Make sure to connect the protective ground
terminal of
the marked terminal block.
The electrical installation of the oven should
equipped with an emergency switch, which
switches off the whole appliance from the mains
supply in an emergency. The distance between
the contacts of the emergency switch must be at
least 3 mm.
Arrange the mains cable in such a way that it
does not get
in contact with any hot components
of the appliance. Do not lead it over sharp edges
or corners.
Connecting the hob to the oven
Connecting the hob to the ovenConnecting the hob to the oven
Connecting the hob to the oven
Insert the plugs
at the end of the hob
the appropriate socket
of the oven terminal block.
Connection wiring d
Connection wiring dConnection wiring d
Connection wiring diagram
iagramiagram
iagram
Permissible connection methods
Permissible connection methodsPermissible connection methods
Permissible connection methods
CAUTION:
CAUTION:CAUTION:
CAUTION:
Each connection requires the protective ground of the
mains to be connected to the P
PP
PE
EE
E
terminal.
NOTE
NOTENOTE
NOTE:
::
:
L1, L2, L3 = Phase | N = Neutral
PE = Protective ground
220-240V~
50Hz
380-415V 3N~
50Hz
H05 VV-F3G
4mm²
H05 VV-F4G
2.5mm²
8
appliance is suitable for three
-phase and AC
50
/60Hz
).
The appliance can be adjusted for single
-phase
current by a respective bypass on the terminal
block, based on the circuit diagram below. Select
mains cable, considering the
connection type and nominal power of the oven.
Fix the mains cable in the tension relief.
Make sure to connect the protective ground
to the
the marked terminal block.
The electrical installation of the oven should
be
equipped with an emergency switch, which
switches off the whole appliance from the mains
supply in an emergency. The distance between
the contacts of the emergency switch must be at
Arrange the mains cable in such a way that it
in contact with any hot components
of the appliance. Do not lead it over sharp edges
at the end of the hob
circuit group in
of the oven terminal block.
Each connection requires the protective ground of the
terminal.
380-415V 3N~
50Hz
H05 VV-F5G
1.5mm²
Startup / Operation
Startup / OperationStartup / Operation
Startup / Operation
Before initial use
Before initial useBefore initial use
Before initial use
Clean the oven interior with all therein located
accessories. Follow the instructions that we give
you in the chapter "Cleaning and Maintenance".
In order to burn any manufacturing residue, h
the closed oven for approx. 30 minutes at 25
NOTE
NOTENOTE
NOTE:
: :
:
The occurring odor and possibly a slight smoke
development cannot be avoided. Therefore e
sure for a good ventilation of the room during
heating.
Operation
OperationOperation
Operation
1
11
1
Level regulator of cooking zones
Level regulator of cooking zonesLevel regulator of cooking zones
Level regulator of cooking zones
CAUTION:
CAUTION: CAUTION:
CAUTION:
Turn the level regulator of the double cooking and
roasting tin zone only clockwise and back again.
Otherwise the switches will be damaged.
The temperature setting is set for each cooking zone
separately by using the
respective level regulator.
=
Position of the cooking zone
0
00
0 = Off-position
1
11
1
= Lowest setting (keep food warm)
6
66
6 = H
ighest setting (quick heating and cooking,
roasting)
= Switch point for double and roasting tin zone
2
22
2 Cooking
CookingCooking
Cooking
zone power control lamp
zone power control lampzone power control lamp
zone power control lamp
The power control lamp indicates the operation of the
cooking zones. It lights up as soon as a cooking zone
is put into operation and goes off if all level regulators
points to the off-position.
Startup / Operation
Startup / OperationStartup / Operation
Startup / Operation
Clean the oven interior with all therein located
accessories. Follow the instructions that we give
you in the chapter "Cleaning and Maintenance".
In order to burn any manufacturing residue, h
eat
the closed oven for approx. 30 minutes at 25
0°C.
The occurring odor and possibly a slight smoke
development cannot be avoided. Therefore e
n-
sure for a good ventilation of the room during
Level regulator of cooking zones
Level regulator of cooking zonesLevel regulator of cooking zones
Level regulator of cooking zones
Turn the level regulator of the double cooking and
roasting tin zone only clockwise and back again.
Otherwise the switches will be damaged.
The temperature setting is set for each cooking zone
respective level regulator.
Position of the cooking zone
= Lowest setting (keep food warm)
ighest setting (quick heating and cooking,
= Switch point for double and roasting tin zone
zone power control lamp
zone power control lampzone power control lamp
zone power control lamp
The power control lamp indicates the operation of the
cooking zones. It lights up as soon as a cooking zone
is put into operation and goes off if all level regulators
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann EHBC 562 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann EHBC 562 in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bomann EHBC 562

Bomann EHBC 562 User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info