688073
7
Zoom out
Zoom in
Previous page
1/20
Next page
Dimensions in mm
Preparing the worktop for
Preparing the worktop for Preparing the worktop for
Preparing the worktop for
installation of the hob
installation of the hobinstallation of the hob
installation of the hob
CAUTION:
CAUTION:CAUTION:
CAUTION:
Before cutting secure the outer
cutout
adhesive tape to avoid traces of jigsaw on the
top.
The worktop must be leveled horizontally
sealed on the wall side against overflowing liquids
or moisture.
The hob must be
completely surrounded by min.
50 mm work surface.
The cut surfaces (cutout edges) must be sealed
with special varnish, silicone rubber
in order to prevent swelling caused by humidity.
Clean and dry the worktop in the cutout area
thoroughly.
Worktop cutout
Worktop cutoutWorktop cutout
Worktop cutout
Prepare the cutout of the worktop
according to the
dimensional drawing.
Dimensions in mm
Installing the hob
Installing the hobInstalling the hob
Installing the hob
NOTE
NOTENOTE
NOTE:
::
:
To avoid damage, place the hob with the top of the
cooking surface on a padded base.
First check the factory fitted hob seal at the hob
frame to the integrity and the proper
7
installation of the hob
installation of the hobinstallation of the hob
installation of the hob
cutout
edge with wide
adhesive tape to avoid traces of jigsaw on the
work-
The worktop must be leveled horizontally
and be
sealed on the wall side against overflowing liquids
completely surrounded by min.
The cut surfaces (cutout edges) must be sealed
with special varnish, silicone rubber
or cast raisin
in order to prevent swelling caused by humidity.
Clean and dry the worktop in the cutout area
according to the
To avoid damage, place the hob with the top of the
First check the factory fitted hob seal at the hob
frame to the integrity and the proper
fit.
Attach the enclosed retaining clamps with the
screws in the provided holes
Place
the hob according to the hob
"Appliance
Overview" and with the connecting c
ble first centrally into the
prepared cutout of the
worktop.
Make sure that the distances to the cutting are
equal on all four sides and
on the worktop.
Installing the oven
Installing the ovenInstalling the oven
Installing the oven
Put the appliance
with the connecting cable f
into the prepared cabinet a bit
Do the connection
to the hob
mains, see "Electrical connection".
Insert the oven into the
cabinet opening
ly
. Make sure that the cable
(bent, squeezed or twisted)
Attach and secure the oven
screws on the side walls of the cabi
The provided mounting holes
(A)
are visible after opening
the
oven door on the left and
right frame
Electrical connection
Electrical connectionElectrical connection
Electrical connection
Information for the
Information for the Information for the
Information for the
authorized expert
authorized expertauthorized expert
authorized expert
WARNING:
WARNING:WARNING:
WARNING:
The installation to the mains supply must conform
to the local standards and regulations.
Connecting the appliance to a domestic power
socket
or using multiple sockets or extension c
bles is not permitted.
Improper connection may cause to an
shock
shockshock
shock!
Before connecting, ensure that the power supply
corresponds with the information on the rating
bel (door frame)
and the wiring
Attach the enclosed retaining clamps with the
screws in the provided holes
laterally of the hob.
the hob according to the hob
drawing under
Overview" and with the connecting c
a-
prepared cutout of the
Make sure that the distances to the cutting are
equal on all four sides and
that the seal is resting
with the connecting cable f
irst
into the prepared cabinet a bit
.
to the hob
as well as to the
mains, see "Electrical connection".
cabinet opening
complete-
. Make sure that the cable
s does not restricted
(bent, squeezed or twisted)
.
Attach and secure the oven
by using the supplied
screws on the side walls of the cabi
net.
The provided mounting holes
are visible after opening
oven door on the left and
right frame
authorized expert
authorized expertauthorized expert
authorized expert
The installation to the mains supply must conform
to the local standards and regulations.
Connecting the appliance to a domestic power
or using multiple sockets or extension c
a-
Improper connection may cause to an
electric
electric electric
electric
Before connecting, ensure that the power supply
corresponds with the information on the rating
la-
diagram.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann EHBC 562 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann EHBC 562 in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bomann EHBC 562

Bomann EHBC 562 User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info