651992
5
Zoom out
Zoom in
Previous page
1/16
Next page
Do not use harsh abrasive cleaners or sharp metal objects for cleaning the glass
surface.
The glass can be scratched or destroved.
Do not try to repair the appliance on your own. Always contact an authorized
technician. If the supply cord is dam
er, its service agent or similarly qualified persons in order to avoid a hazard.
Unpacking the Appliance
Unpacking the ApplianceUnpacking the Appliance
Unpacking the Appliance
Remove the appliance from its packaging.
Remove all packaging material, such as foils, filler
and cardboard packaging.
To prevent hazards, check the appliance for any
transport damage.
In case of damage, do not put the appliance into
operation. Contact your distributor.
NOTE
NOTENOTE
NOTE:
::
:
Production residue or dust may have collected on the
appliance. We recommend clea
ning the appliance
according to chapter “Cleaning”.
Appliance Equipment
Appliance EquipmentAppliance Equipment
Appliance Equipment
Hob arrangement
Hob arrangementHob arrangement
Hob arrangement
NOTE
NOTENOTE
NOTE:
::
:
The listed
power settings can vary depending on the
material and/or size of the cookware.
1
11
1
Control panel
2
22
2 Ø
180 mm / 2000 W
3
33
3 Ø
160 mm / 1500 W
4
44
4 Ø
180 mm / 2000 W
5
55
5 Ø
160 mm / 1500 W
De
DeDe
Delivery scope
livery scopelivery scope
livery scope
installation material:
4 x mounting
bracket, 4 x fixing
screw
5
Do not use harsh abrasive cleaners or sharp metal objects for cleaning the glass
The glass can be scratched or destroved.
Do not try to repair the appliance on your own. Always contact an authorized
technician. If the supply cord is dam
aged, it must be replaced by the manufactu
er, its service agent or similarly qualified persons in order to avoid a hazard.
Unpacking the Appliance
Unpacking the ApplianceUnpacking the Appliance
Unpacking the Appliance
Remove the appliance from its packaging.
Remove all packaging material, such as foils, filler
To prevent hazards, check the appliance for any
In case of damage, do not put the appliance into
operation. Contact your distributor.
Production residue or dust may have collected on the
ning the appliance
Appliance Equipment
Appliance EquipmentAppliance Equipment
Appliance Equipment
power settings can vary depending on the
material and/or size of the cookware.
Control panel
180 mm / 2000 W
160 mm / 1500 W
180 mm / 2000 W
160 mm / 1500 W
bracket, 4 x fixing
Installation
InstallationInstallation
Installation
WARNING:
WARNING:WARNING:
WARNING:
The installation
and the connection to the main power
may only be performed by an authorized specialist.
CAUTION
CAUTIONCAUTION
CAUTION:
::
:
The worktop, the
cabinet, veneers
ings, used
adhesives etc. must be sufficient
resistant.
The appliance
must be installed so that heat can
be dissipated.
Air inlet (D) and air outlet (E) must
not be blocked.
The appliance conforms to the heat insulation
class Y, i.e. only one side of the appliance may be
installed near higher kitchen furniture or walls.
The distance between the hob and an extractor
hood must be at least as large as specified in the
instructions of the extractor hood!
Below the cutout mus
t remain a minimum di
tance (B). In this area are not allowed heat
sensitive objects (cabinet, drawer, etc.). Possibly
existing sidewalls or drawer boxes must be sawed
accordingly or removed.
Keep safety distances
; sufficient air circulation
must be ensured:
Do not use harsh abrasive cleaners or sharp metal objects for cleaning the glass
Do not try to repair the appliance on your own. Always contact an authorized
aged, it must be replaced by the manufactu
r-
er, its service agent or similarly qualified persons in order to avoid a hazard.
Installation
InstallationInstallation
Installation
and the connection to the main power
may only be performed by an authorized specialist.
cabinet, veneers
, plastic coat-
adhesives etc. must be sufficient
heat-
must be installed so that heat can
Air inlet (D) and air outlet (E) must
The appliance conforms to the heat insulation
class Y, i.e. only one side of the appliance may be
installed near higher kitchen furniture or walls.
The distance between the hob and an extractor
hood must be at least as large as specified in the
instructions of the extractor hood!
t remain a minimum di
s-
tance (B). In this area are not allowed heat
-
sensitive objects (cabinet, drawer, etc.). Possibly
existing sidewalls or drawer boxes must be sawed
; sufficient air circulation
A
AA
A
600 – 750 mm
B
BB
B
50 mm
C
CC
C
20 mm
D
DD
D
Air inlet
E
EE
E
Air outlet
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann EBK 960 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann EBK 960 in the language / languages: English as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bomann EBK 960

Bomann EBK 960 User Manual - German - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info