814382
27
Zoom out
Zoom in
Previous page
1/32
Next page
27
Cleaning and maintenance
WARNING:
Always switch off the appliance completely before
cleaning and maintenance work and disconnect it
from the power supply if necessary.
Allow the unit to cool down before cleaning.
Do not use steam cleaners for cleaning the appli-
ance; moisture could enter electrical components.
Risk of electric shock! Hot steam could damage
the plastic parts.
Never use flammable substances, such as thin-
ner, kerosene, gasoline or acids for cleaning.
The unit must be dry before restarting operation.
CAUTION:
Do not use a wire brush or other sharp, abrasive
items.
Do not use harsh abrasive cleaners or sharp
metal objects for cleaning the glass surface. The
surfaces can be scratched or destroyed.
Always consider the application and safety notes
of the detergent.
Cleaning the hob
Remove food residues while the hob is still warm
with a damp cloth or paper towel.
Wash the hob with a soft sponge and a little water
and dry thoroughly with a soft cloth.
Cleaning agent for glass ceramic surfaces
For burnt-on residues, help yourself to products from
the specialist departments of stores.
Staining
Cleaning method
Cleaning tools
Dirt has ac-
cumulated
Use warm water
and a sponge to
rub dry.
Special clean-
ing sponge for
glass ceramic
Staining
Cleaning method
Cleaning tools
Pools and
lime depo-
sits
Apply warm vine-
gar and wipe off
with a dry cloth or
use special clean-
ing agent.
Special clean-
ing agent for
glass ceramic
Sugar,
melted alu-
minum, or
plastic
Remove by using
a glass ceramic
scraper.
special clean-
ing agent and
scraper for
glass ceramic
Troubleshooting
Before you contact an authorized specialist
In the event of some malfunctions, the hob automati-
cally goes into protection mode and the corresponding
error code is displayed.
Problem / possible cause / action
Appliance does not work
Check the power supply / main fuse.
Control panel does not react or only very difficult
- Child safety lock is activated.
-
Clean and dry the operating surface.
Cracking noises during operation
May be caused by the cookware construction (lay-
ers of different metals).
Ventilation noise after switching off
No failure, the fan continues to run for some time
for overheating protection.
Error code
E1
Disconnect the
power supply
briefly. If the fault
occurs again, con-
tact a specialist!
Display board is not receiving
the signal from the power sup-
ply board.
Error code
E2
Power supply board is not re-
ceiving the signal from the dis-
play board.
Error code
E3
Relay failure
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann EBK 7941 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann EBK 7941 in the language / languages: English, German as an attachment in your email.

The manual is 0.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info