814382

Bomann EBK 7941 Manual

25
Zoom out
Zoom in
Previous page
1/32
Next page
25
• Set a power level from 1 to 9 by moving your fin-
ger over the slider (M8).
- If you do not select a power level within one
minute, the hob switches off automatically.
- You can change the power level at any time
during cooking.
• To switch off a cooking zone, select the cooking
zone again and set the power level back to 0.
Dual and oval cooking zone
The double ring zones have a second heating ring
that you can switch on depending on the size of the
cookware. Heating ring (A) can be used inde-
pendently of heating ring (B) or simultaneously.
Note! Heating ring (B) can only start if heating ring
(A) is already in operation!
• Select the cooking zone for which you want to
switch on the second heating ring using the re-
spective button (M2) or (M4). The display shows
the active inner heating ring [ ].
• Press the button (M2) or (M4) again to open the
outer heating ring. The display now also shows
the outer heating ring [ ].
• Switch off the second heating ring in the same
way.
Residual heat indicator
WARNING: Risk of burns!
Do not touch the cooking zones while the residual
heat indicator lights up.
After switching off the cooking zone, the residual
heat of the corresponding zone is indicated with [H].
This warns against touching the zone.
Safety child lock
The appliance is equipped with a locking function to
prevent unintentional operation.
• Keep pressing the button (M6) for approx. 3 sec-
onds to activate (deactivate) the safety child lock.
The timer display indicates activation with [Lo].
All buttons, except the power button are locked
for operation.
When the timer function is active, the timer display
alternately shows the remaining time and [Lo].
Timer function
General information
• You can use the timer to automatically end the
cooking process on one or more zones after a
preset time.
• The timer can be set between 1 and 99 minutes.
As long as the minute display flashes in the timer
display, the setting can be overwritten.
• A red dot next to the power level indicates that a
timer has been set for this zone.
• The power level can be corrected at any time
without changing the time setting.
• The timer function is cancelled when the appli-
ance is switched off.
Using the timer to switch off one cooking zone
• Select the cooking zone that is already in opera-
tion and for which you want to set the timer.
• Press the button (M5) for the timer. The timer dis-
play lights up [00].
• Set the time by moving your finger over the
slider (M8).
The timer display shows the remaining time.
Using the timer to switch off several cooking zones
• Do the timer setting for several cooking zones as
described under
"Using the timer to switch off one
cooking zone".
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann EBK 7941 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann EBK 7941 in the language / languages: English, German as an attachment in your email.

The manual is 0.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info