688080
19
Zoom out
Zoom in
Previous page
1/28
Next page
19
Attach the brackets [05] and [06] at the pre-
marked positions with two screws ST4x30mm
[10].
Before inserting the hood, affix the non-return
valves from the top of the extraction duct by
slightly bending.
For exhaust mode:
For exhaust mode:For exhaust mode:
For exhaust mode:
Hereupon a flexible exhaust hose (not supplied)
with an inner diameter of 150 mm must be at-
tached.
Hang up the hood body onto the wall bracket
hook [07]. Check the safe, horizontal support and
tighten two screws ST4x30mm [10] through the
hood body.
For exhaust mode:
For exhaust mode:For exhaust mode:
For exhaust mode:
Check the correct position of the exhaust hose
and connect it with the outlet opening.
Put the shaft unit on and secure the lower shaft
with the bracket [05].
Pull up the inner shaft and fix the shaft cover
sideways with the bracket [06] by screwing in the
screws ST3x10mm [11].
Installing the activated carbon
Installing the activated carbonInstalling the activated carbon
Installing the activated carbon
filter for recircula
filter for recirculafilter for recircula
filter for recirculation
tion tion
tion
mode
modemode
mode
Remove the aluminum grease filter (see “Clean-
ing the aluminum grease filter).
Place the carbon filter onto the air intake of the
extraction duct. Make sure that the mounting pins
on the extraction duct engage the mounting slots
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann DU 774 G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann DU 774 G in the language / languages: English, German as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info