651975
19
Zoom out
Zoom in
Previous page
1/28
Next page
NOTE
NOTENOTE
NOTE:
::
:
Recomm
RecommRecomm
Recomm
endations for preparation work
endations for preparation workendations for preparation work
endations for preparation work
When installing, ask another
person
Wear protective gloves to prevent injuries from any sharp edges.
1
4 5
Determine the position of the extractor hood centrally above the hob in
safety distances.
Mark the necessary holes for the wall mounting by using the supplied drill template and check them with a
spirit level.
Drill Ø 8 mm mounting holes into
fasten the brackets with the
screws
Attach the suspension rail (1)
for
edge parallel to the rail (1) (Fig.
A).
Before suspending the hood:
-
the glass capture panel is fastened to the hood body with the screws (
washers (Fig. B).
- insert the non-return valves
(4)
For extraction mode:
For extraction mode:For extraction mode:
For extraction mode:
Hereupon a flexible extraction hose (not supplied) with an inner diameter of Ø 150 mm must be
(Fig. C) and connected to the outside by the extraction outlet.
Hook the extractor hood into the suspension rail (1) (Fig. D). Check that it is secure and horizontally level.
Remove the protective plastic from the telescopic duct.
Fix the outer (lower) duct with
the mounting rail without the bracket (3). The rail is fastened to the holes
provided from the inside of the duct.
19
endations for preparation work
endations for preparation workendations for preparation work
endations for preparation work
person
to assist.
Wear protective gloves to prevent injuries from any sharp edges.
2
6 7
Determine the position of the extractor hood centrally above the hob in
con
formance with the
the wall for the respective brackets (1+2+3).
Insert
screws
(6).
for
the hood body
as well as the mounting rail with bracket (2) to the top
A).
Determine the extension length of the duct
cover
the glass capture panel is fastened to the hood body with the screws (
7) in the rubber plugs with
(4)
onto the extractor duct from above by gently
bending
(Fig. C) and connected to the outside by the extraction outlet.
Remove the protective plastic from the telescopic duct.
provided from the inside of the duct.
Screw in two plate screws (8) from the back
(Fig.
3
8
formance with the
specified
Mark the necessary holes for the wall mounting by using the supplied drill template and check them with a
Insert
the dowel pins (5) and
as well as the mounting rail with bracket (2) to the top
cover
in advance!
7) in the rubber plugs with
bending
them.
Hereupon a flexible extraction hose (not supplied) with an inner diameter of Ø 150 mm must be
attached
Hook the extractor hood into the suspension rail (1) (Fig. D). Check that it is secure and horizontally level.
the mounting rail without the bracket (3). The rail is fastened to the holes
(Fig.
E).
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann DU 657 G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann DU 657 G in the language / languages: English, German as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info