688076
21
Zoom out
Zoom in
Previous page
1/28
Next page
21
Cleaning the aluminum grease filter
Cleaning the aluminum grease filterCleaning the aluminum grease filter
Cleaning the aluminum grease filter
WARNUNG: Risk of fire!
WARNUNG: Risk of fire!WARNUNG: Risk of fire!
WARNUNG: Risk of fire!
Grease residue in aluminum grease filter may ignite
at intense heat. Therefore, clean the grease filter
regularly!
We recommend cleaning the grease filter monthly:
Remove the aluminum grease filter by sliding
back the lock in the handle recess, push the filter
down gently and pull out towards the front.
Rinse the grease filter in a solution of hot water
and neutral detergent. Soak the filter in it.
Then clean with a soft brush, rinse thoroughly with
hot water and allow drying.
Alternatively, the grease filter can also be cleaned
in the dishwasher (up to 65°C). Slight discolora-
tion may occur. This does not affect the function
of the grease filter.
Replacing the activated carbon filter
Replacing the activated carbon filterReplacing the activated carbon filter
Replacing the activated carbon filter
mat
matmat
mat
The activated carbon filter mat prevents odors and
must depend on the use but be changed at least
every six months.
Order the carbon filter mat from your dealer or in our
online accessories shop, www.bomann
www.bomannwww.bomann
www.bomann-
--
-germany.de
germany.degermany.de
germany.de.
Use the reference number found under “Technical
Data”.
See “Installing the activated carbon filter mat for
recirculation mode”.
Remove and dispose the old carbon filter mat.
Replacing the bulb
Replacing the bulbReplacing the bulb
Replacing the bulb
CAUTION:
CAUTION:CAUTION:
CAUTION:
Do NOT
NOTNOT
NOT remove the LED lighting cover!
The bulb may only be replaced by an authorized
specialist in case of a defect.
WAR
WARWAR
WARNING
NINGNING
NING:
::
:
The light of LED lamps is very bright and can
damage the eyes. Never
. Never. Never
. Never look directly into the
LED light!
Disconnect the appliance from the power supply
and allow the lamps to cool down before changing
the lamp. There is a risk of burns!
There is a risk of burns!There is a risk of burns!
There is a risk of burns!
NOTE
NOTENOTE
NOTE:
::
:
Order the lamps from your dealer or in our online
accessories shop www.bomann
www.bomannwww.bomann
www.bomann-
--
-germany.de
germany.degermany.de
germany.de.
Lamp data:
Lamp data:Lamp data:
Lamp data:
LED max. 1 x 2.0W, AC 12V, ILCOS D Code after
EN 61231: DBS-2/30-H-120-33
Remove the grease filter.
Depending on model (a)
or (b):
Open the black protective box of the plug-in
device and release the plug connection.
Carefully push the lamp out of the holder.
Replace defect LED module and connect the two
ends of the plug-in device.
Insert new lamp properly in the bulb holder.
Close the protective box with inserted plug-in
device. Replace the grease filter.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann DU 623.3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann DU 623.3 in the language / languages: English, German as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info