651970
20
Zoom out
Zoom in
Previous page
1/28
Next page
For extraction mode, you
must also create a feed through of approx. Ø 130 mm in the base of the unit.
If the mains cable is fed through the unit, a feed through also must be provided.
Drill four mounting holes of Ø 4 mm through the base of the unit. Screw in the appliance with the
including washers (3) under the wall unit and tighten the nuts (4) through the hood body.
For extraction mode insert the connecting
Thereto a flexible extraction hose (not supplied)
connected to the outside by an extraction vent.
For recirculation mode close the air outlet
Reinstall the grease filter grid or aluminum grease filter.
Installing the activated carbon filter
Installing the activated carbon filter Installing the activated carbon filter
Installing the activated carbon filter
mat
mat mat
mat
Model: DU 622
Model: DU 622Model: DU 622
Model: DU 622.1
.1.1
.1
Remove the grease filter grid (3) including fleece filter. Loosen the moun
ing wires (1) that hold the fleece filter in position.
Insert the previously fitted carbon filter
clamp the mounting wires in again.
Reinstall the grease filter grid
Model: DU 623
Model: DU 623Model: DU 623
Model: DU 623.1
.1.1
.1
IX
IXIX
IX
Remove the aluminum grease filter (1).
Insert the previously fitted carbon
fix the mat parts each with two metal struts (2) (
filter mat).
Reinstall the
NOTE
NOTENOTE
NOTE:
::
:
The carbon filter mat absorbs
odours
Electrical connection
Electrical connectionElectrical connection
Electrical connection
WARNING:
WARNING:WARNING:
WARNING:
The installation to the mains supply must conform to the local standards and regulations.
Improper connection may cause to an
Do not modify the appliance
plug
an authorized specialist.
The accessibility of the power plug must be ensured in order to disconnect the
supply in case of an emergency.
20
must also create a feed through of approx. Ø 130 mm in the base of the unit.
If the mains cable is fed through the unit, a feed through also must be provided.
Drill four mounting holes of Ø 4 mm through the base of the unit. Screw in the appliance with the
including washers (3) under the wall unit and tighten the nuts (4) through the hood body.
For extraction mode insert the connecting
piece with non-return valves (5
) from above onto the air outlet.
Thereto a flexible extraction hose (not supplied)
with an inner diameter of Ø 120 mm must be fitted and
connected to the outside by an extraction vent.
For recirculation mode close the air outlet
by putting on the cover (6).
Reinstall the grease filter grid or aluminum grease filter.
mat
mat mat
mat
for recirculation mode
for recirculation modefor recirculation mode
for recirculation mode
Remove the grease filter grid (3) including fleece filter. Loosen the moun
ing wires (1) that hold the fleece filter in position.
Insert the previously fitted carbon filter
mat (2) onto the fleece filter and
clamp the mounting wires in again.
Reinstall the grease filter grid
with fixed
fleece filter and carbon filter mat.
Remove the aluminum grease filter (1).
Insert the previously fitted carbon
filter mat parts onto the grease filter and
fix the mat parts each with two metal struts (2) (
supplied with
filter mat).
Reinstall the
aluminum grease filter with fixed carbon filter mats.
odours
and must be replaced at least every six months
The installation to the mains supply must conform to the local standards and regulations.
Improper connection may cause to an
electric shoc
electric shocelectric shoc
electric shock!
k!k!
k!
plug
. If the plug does not fit properly to the outlet, let install a proper outlet by
The accessibility of the power plug must be ensured in order to disconnect the
appliance
must also create a feed through of approx. Ø 130 mm in the base of the unit.
Drill four mounting holes of Ø 4 mm through the base of the unit. Screw in the appliance with the
screws
including washers (3) under the wall unit and tighten the nuts (4) through the hood body.
) from above onto the air outlet.
with an inner diameter of Ø 120 mm must be fitted and
Remove the grease filter grid (3) including fleece filter. Loosen the moun
t-
mat (2) onto the fleece filter and
fleece filter and carbon filter mat.
filter mat parts onto the grease filter and
supplied with
the carbon
aluminum grease filter with fixed carbon filter mats.
regardless of use.
The installation to the mains supply must conform to the local standards and regulations.
. If the plug does not fit properly to the outlet, let install a proper outlet by
appliance
from the power
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann DU 622.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann DU 622.1 in the language / languages: English, German as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info