Manual Bomann BSS 6000 CB (page 44 of 78) (English, German, Dutch, French, Italian, Polish, Spanish)

814746

Zoom out

Zoom in

1/78

BSS6000CB 17.10.17

Installation

Before you are able to use the appliance you have to assem-

ble it rst. Proceed as follows:

Rollers

1. Plug the black feet left and right on the bottom next to

the outlet opening of the appliance. Secure each with a

screw.

2. Plug the rollers into the bottom of the foot.

Shampoo Tank Bracket

Insert the shampoo tank bracket opposite of the rollers al-

ready mounted. Secure it on both sides each with a screw.

Wheels

Attach the big wheels left and right at the shampoo tank

bracket.

NOTE:

Once the wheels are mounted, it is no longer possible to

detach them!

Carrying Handle

Install the handle with 2 screws onto the engine housing.

Connecting and Detaching the Hose

Suction Function

• Put the hose connection into the suction opening on the

collection vessel. Use the guides to do so.

• Turn the hose connection towards . In order to

remove the suction hose twist off the hose connection

counterclockwise.

Blower Function

• Insert the hose connection into the blower opening at the

engine housing. Use the guides to do so.

• Turn the hose connection towards . In order to remove

the suction hose twist off the hose connection clockwise.

2-part Suction Pipe

• Insert one of the suction pipes with the thicker end into

the hose end.

• Insert the other suction pipe with the thicker end onto the

rst suction pipe.

• To release the suction pipes, pull them off while turning

them slightly.

Notes on Use

Protective Filter Made of Foam

Beneath the motor, there is a protective lter made of foam.

This is required for both wet and dry vacuuming.

• If not yet in place, put the protective lter over the suction

basket.

NOTE:

• The protective lter must fully enclose the suction

basket.

• You should check the condition of the lter and that it is

rmly in place at regular intervals.

Permanent Filter (Only when Vacuuming Dry)

Put the permanent lter over the protective lter.

NOTE:

The permanent lter must fully enclose the suction basket.

Attaching the Motor Housing

• Adjust the motor housing so that the on / off switch (I / O / II)

sits above the suction opening.

• Close both locking mechanisms.

Nozzle Attachment

Wet / Dry Brush

You may vacuum leaked or spilled liquids of at surfaces,

carpets and parquet with the wet / dry brush.

NOTE:

Check the maximum ll capacity of the collection vessel.

10 litres of liquid without foaming additive!

Shampoo Brush

You may clean carpets with a commercial carpet shampoo by

using the shampoo brush.

Upholstery Brush

You may clean upholstery with a commercial upholstery

shampoo by using the upholstery brush.

Crevice Nozzle

For vacuuming upholstery, curtains and in corners and

crevices etc.

Mains Lead

• Completely unwind the cable during operation.

• After use, allow the motor housing to cool down. You may

wind the cord around the engine housing afterwards.

Turning On / Off

The On / Off switch has several functions:

0 Off

I Wet and dry vacuuming / Blower function

II Vacuuming with shampoo

NOTE:

Switch position II additionally activates the pump.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bomann BSS 6000 CB in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2.2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bomann BSS 6000 CB Manual

Product: