320245
33
Zoom out
Zoom in
Previous page
1/54
Next page
ENGLISH
ENGLISH
ENGLISH
33
illustration 5
2. Inlet lter
The inlet fi lter is located below
the dust container compartment.
Press the button to release the
dust container and then remove
it. Turn the fi lter in an anticlockwi-
se direction in order to remove it.
Clean the inlet fi lter approximately every tenth time the dust
container is emptied, or more frequently if necessary. Please
ensure that the fi lter is always clean, as otherwise air
circulation cannot be guaranteed. If necessary, the fi lter can
also be washed in warm water without any additives. Place it
back into place only once it is completely dry!
illustration 6
3. Outlet lter
The appliance is also equipped
with an outlet fi lter. In order
to ensure that the fi lter works
correctly, we recommend that
you replace it every six months. It
is located on the rear part of your
appliance behind a ventilation
grid. Open the ventilation grille
by pressing the lever on its side.
Then pull the grille out towards
the front. Remove the fi lter and
clean as described above. Fit the
lter back into place and close
the ventilation grid by following
the steps above in the opposite
order.
illustration 7
Important note!
Cleaning may become necessary after a shorter time,
depending on the conditions of use, e.g. when vacuuming
ne dust.
If the suction power of your vacuum cleaner diminishes
please clean the fi lters as described.
If the suction power suddenly diminishes during operation
this may be due to the fi lters being locked.
Cleaning and storage
Cleaning
Pull the plug out of the socket before cleaning!
Clean the casing with a dry cloth.
Clean the motor protection fi lter approximately every 3.
time the vacuum cleaner is emptied. Clean the fi lter in hot
water without additives. Put it back into place only once it is
completely dry.
Storage
Let the iron cool down completely.
Wind the cable completely.
Please position the device horizontally and insert the hook
on the telescopic tube into the parking aid (11) on the back
of the device.
Technical Data
Model: ......................................................................... BS 983 CB
Power supply:............................................................230 V, 50 Hz
Power consumption:
P
nom.
:............................................................................ 1600 W
P
max.
:............................................................................2300 W
Protection class:.......................................................................... ΙΙ
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance with
the latest safety regulations.
Subject to technical changes without prior notice!
Guarantee
The device supplied by our Company is covered by a 24 month
guarantee starting on the date of purchase (receipt).
During the life of the guarantee any fault of the device or its
accessories ascribable to material or manufacturing defects will
be eliminated free of charge by repairing or, at our discretion, by
replacing it. The guarantee services do not entail an extension
of the life of the guarantee nor do they give rise to any right to a
new guarantee!
Proof of the guarantee is provided by the proof of purchase.
Without proof of purchase no free replacement or repair will be
carried out.
If you wish to make a claim under the guarantee please return
the entire machine in the original packaging to your dealer
together with the receipt.
Defects to consumables or parts subject to wearing as well as
cleaning, maintenance or the replacement of said parts are not
covered by the guarantee and hence are to be paid!
The guarantee lapses in case of unauthorized tampering.
After the expiry of the guarantee
After the expiry of the guarantee repairs can be carried by the
competent dealer or repair service against the payment of the
ensuing costs.
05-BS 983 CB 33 09.10.2006, 15:08:07 Uhr
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann bs 983 cb at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann bs 983 cb in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 1,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info