Manual Bomann bs 983 cb (page 32 of 54) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Norwegian)

320245

Zoom out

Zoom in

1/54

ENGLISH

Telescope Vacuum Pipe

The height-adjustable vacuum pipe enables individual alignment

to your height.

• Unlock the coupling by pressing the key in the direction of

the arrow.

• Slide the vacuum pipe to the desired length.

• To lock the device, release the key until you hear it lock in

place.

Nozzle accessories

Groove and brush nozzle: For vacuuming upholstery, cur-

tains and in corners and crevices

etc.

„2-in-1“ nozzle: When this is

folded together it can be used as

a groove nozzle. If you would like

to use the brush nozzle, pull the

brush section in the direction of

the arrow until it locks in place.

Upholstery nozzle: For cleaning upholstery, curtains

etc.

Metal ﬂ oor nozzle: To clean carpets or smooth

surfaces.

Smooth ﬂ oors:

Press down the lever with the

brush symbol with your foot. The

brush is now visible.

Carpets:

Press down the opposite lever.

Parquet brush: The ﬂ oor nozzle is ﬁ tted with rol-

lers for improved manoeuvrability.

For large areas such as parquet,

laminate or tiles etc.

Turbo brush: The ﬂ oor nozzle is ﬁ tted with

rollers for improved manoeuvra-

bility. The brush is equipped with

a rotating and swivelling brush

roller driven by the air current.

Removes ground-in dirt, animal

hairs, threads and ﬂ uff particular-

ly thoroughly. The carpet pile is

brushed up to look almost new.

Please note that the turbo

brush is not suitable for

smooth ﬂ oors, e.g. parquet,

laminate etc. as the surface

might be damaged.

Releasing the nozzles: Pull these off while turning

slightly.

Air Slide

Open the air slide on the hose handle in order to regulate the

airﬂ ow or to clear any particles sticking to the nozzle.

Filter

Your machine has three ﬁ lter systems. The traditional dust bag

system has been replaced by a transparent dust container. In

this, coarse dirt particles and tiny particles ﬂ oating in the air are

swirled out of the suction air by the high speed of the air current.

The purchase of dust bags is no longer necessary.

If the dust container is approximately 1/3 full with dust particles,

or if the suction power is reduced, please proceed as follows:

illustration 1

Emptying the Dust Container

Press the button to release the

dust container and remove it from

the vacuum cleaner.

illustration 2

• Press the button on the side

of the container to empty its

contents.

• Then close the ﬂ ap of the

dust container again.

illustration 3

1. Motor Protective Filter

(in the Dust Container)

Cleaning the Filter Element

Important:

Always empty the dust con-

tainer ﬁ rst before removing

the ﬁ lter element.

• Press the button to release the dust container and then

remove it (see illustration 1).

• Remove the contents of the dust container. In order to do

this, press the button on the dust container (see illustration

2). Unlock the ﬁ lter element by pressing brieﬂ y in a clockwi-

se direction (see illustration 3). In the second step the ﬁ lter

element can be removed by pulling downwards

• Clean the motor protection ﬁ lter by tapping and gently

brushing out.

• Now replace the components.

• Then close the ﬂ ap of the dust container again.

illustration 4

Every third time the dust contai-

ner is emptied, or in the case of

severe soiling, clean the ﬁ lter by

allowing water to ﬂ ow through the

ﬁ lter fabric against the direction in

which the vacuum cleaner blows.

Now place this back in position once it has completely dried!

Caution: Never wash the ﬁ lter in the washing machine, and

please do not use a hairdryer to dry it.

05-BS 983 CB 32 09.10.2006, 15:08:04 Uhr

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bomann bs 983 cb in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 1,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bomann bs 983 cb Manual

Product: