320243

Bomann bs 971 cb Manual

34
Zoom out
Zoom in
Previous page
1/54
Next page
ENGLISH
34
Technical Data
Model: ..........................................................................BS 971 CB
Power supply: ............................................................230 V, 50 Hz
Power consumption:
P
nom.
: ............................................................................1200 W
P
max.
: ............................................................................2000 W
Protection class: .......................................................................... ΙΙ
Net weight: ........................................................................4,70 kg
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance with
the latest safety regulations.
Subject to technical changes without prior notice!
Meaning of the “Dustbin” Symbol
Protect our environment: do not dispose of electrical equipment
in the domestic waste.
Please return any electrical equipment that you will no longer
use to the collection points provided for their disposal.
This helps avoid the potential effects of incorrect disposal on the
environment and human health.
This will contribute to the recycling and other forms of reutilisa-
tion of electrical and electronic equipment.
Information concerning where the equipment can be disposed of
can be obtained from your local authority.
Cleaning the Filter Element
CAUTION:
Always empty the dust contai-
ner rst before removing the
lter element.
• Press the button to release
the dust container and then
remove it (see illustration 1).
• Turn the lid in the direction
„
“ and then lift it off, inclu-
ding the lter element.
• Turn the lter element in the
„OPEN“ direction to remove
it from the lid. Remove the
lter element (two parts)
and clean the main lter by
tapping out the contents and
gently brushing.
• Now replace the compon-
ents. Please then turn the
lter element in the CLOSE
direction until it is tight.
• Place the lid on the dust
container - the arrow is
located above the „ “ symbol
- and then turn it in the „ “
direction until it is tight.
Every third time the dust container
is emptied, or in the case of severe
soiling, clean the lter by allowing
water to ow through the lter
fabric against the direction in which
the vacuum cleaner blows. The
dust container should only be rein-
serted when it is completely dry!
Now place this back in position
once it has completely dried!
CAUTION:
Never wash the filter in the washing machine, and please
do not use a hairdryer to dry it.
Motor protection filter
(inlet filter)
The inlet lter is located in the
dust container compartment. The
lter is located vertically in the
rear section of the dust housing.
Pull the lter out towards the front.
Clean the motor protection lter
approximately every 10th time
you empty the dust container. If
necessary, the lter can also be
washed in warm water without any
additives. Place it back into place
only once it is completely dry!
Outlet filter (13)
The appliance is also equipped
with an outlet lter. In order
to ensure that the lter works
correctly, we recommend that you
replace it every six months. It is
located on the rear part of your
appliance behind a ventilation
grid. Open the ventilation grille
by pressing the lever on its side.
Then pull the grille out towards
the front. Remove the lter and
clean as described above. Fit the
lter back into place and close
the ventilation grid by following
the steps above in the opposite
order.
IMPORTANT NOTE!
• Cleaning may become necessary after a shorter time,
depending on the conditions of use, e.g. when vacuuming
ne dust.
• If the suction power of your vacuum cleaner diminishes
please clean the lters as described.
• If the suction power suddenly diminishes during operation
this may be due to the lters being locked.
Cleaning and storage
WARNING:
• Before cleaning remove the mains lead from the socket.
• Under no circumstances should you immerse the device
in water for cleaning purposes. Otherwise this might result
in an electric shock or re.
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
Cleaning
• Clean the casing with a dry cloth.
• Clean the motor protection lter approximately every 10.
time the vacuum cleaner is emptied. Clean the lter in hot
water without additives. Put it back into place only once it is
completely dry.
Storage
• Let the iron cool down completely.
• Wind the cable completely.
• Insert the hook of the nozzle on the back of the device into
the parking aid (14).
• If you position the device horizontally: Please insert the hook
of the oor nozzle into the parking assistant on the rear of
the device.
• If you position the device vertically: Please insert the hook of
the suction tube into the parking assistant on the bottom of
the device.
05-BS 971 CB Neu.indd 34 01.04.2010 10:24:05 Uhr
… 34 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann bs 971 cb at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann bs 971 cb in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info