320243

Bomann bs 971 cb Manual

33
Zoom out
Zoom in
Previous page
1/54
Next page
ENGLISH
33
Symbols in these Instructions for Use
Important information for your safety is specially marked. It is
essential to comply with these instructions in order to avoid ac-
cidents and prevent damage to the machine:
WARNING:
This warns you of dangers to your health and indicates
possible injury risks.
CAUTION:
This refers to possible hazards to the machine or other
objects.
NOTE: This highlights tips and information.
Special Safety Instructions
• Do not suck up liquids!
• Do not suck up hot ashes or pointed or sharp objects!
• Do not use the appliance in humid rooms!
• Never use without the lter. Check that the lter is inserted
correctly!
• hair, clothing and body parts away from the vacuum nozzle
during use!
• Keep the vacuum cleaner away from sources of heat like
radiators, ovens, etc.!
Overview of the Components
1 Vacuum hose
2 Hose connection
3 Carrying handle
4 Vacuum power regulator
5 Button for releasing the new dust container
6 Dust container with lter insert
7 On/off switch
8 Accessory holder
9 Floor nozzle
10 Cable-winding key
11 Telescopic suction tube
12 Air slide
13 Cover of outlet lter
14 Parking assistance
Accessories:
„2-in-1“ nozzle (groove and brush nozzle),
Upholstery nozzle
Start-up
• Insert the connection head of the suction hose into the hose
connector until it locks in place. To do so, please press the
buttons simultaneously. In order to release the hose again,
please press the buttons once more on the connection
head.
• Keep the buttons pressed down and then pull out the hose.
• Insert the vacuum tube into the handle if required.
Using the Appliance
1. Fit on the accessory.
2. Unwind the necessary length of cable and insert the plug in
a duly installed 230V/50Hz protective contact socket.
3. Set the vacuum power with the vacuum power regulator.
4. Vacuum at a steady speed. There is no need to exert pres-
sure.
NOTE:
Pay attention to the range that can be covered with the cable
length!
Vacuum power regulator
Low vacuum power: For curtains and delicate fabrics
Medium vacuum power: For long-pile velour carpets and
textile ooring
High vacuum power: For sturdy rugs and oors
Cable winding device
Pull out the cable up to the maximum length indicated with the
yellow mark. Never pull the cable out up to the red mark as the
cable winding can be damaged. Said damages are not covered
by the warranty.
Winding
Press the cable winding button and guide the cable. Hold the
cable to avoid wrapping.
Telescope Vacuum Pipe
The height-adjustable vacuum pipe enables individual alignment
to your height.
• Unlock the coupling by pressing the key in the direction of
the arrow.
• Slide the vacuum pipe to the desired length.
• To lock the device, release the key until you hear it lock in
place.
Nozzle accessories
NOTE:
The accessories are to be found in the holder on the telesco-
pic tube.
Upholstery nozzle: For vacuuming upholstery, curtains
and in corners and crevices etc.
Groove and brush nozzle: „2-in-1“ nozzle: When this is folded
together it can be used as a groove
nozzle. If you would like to use the
brush nozzle, pull the brush section in
the direction of the arrow until it locks
in place.
Floor nozzle: To clean carpets or smooth surfaces.
Releasing the nozzles: Pull these off while turning slightly.
In order to facilitate control, the oor nozzle (9) is tted with roll-
ers and can be adjusted to suit the circumstances.
Carpet: make sure that the brushes on the oor nozzle are
deactivated when cleaning carpets. If this is not the case, press
the lever on the oor nozzle forwards with your foot.
In order to vacuum even surfaces, for example, press the lever
back with your foot. This activates the brushes (you can tell
whether this is the case by checking that the brushes are visible
on the oor nozzle).
Air Slide
Open the air slide on the hose handle in order to regulate the
airow or to clear any particles sticking to the nozzle.
Filter
Your machine has three lter systems. The traditional dust bag
system has been replaced by a transparent dust container. In
this, coarse dirt particles and tiny particles oating in the air are
swirled out of the suction air by the high speed of the air current.
The quantity of dust can be easily read off at any time on the
container, which is also very easy to empty.
The purchase of dust bags is no longer necessary.
Main Filter (in the Dust Container)
Once the dust level has reached the MAX mark on the dust con-
tainer, or the suction power of the vacuum cleaner is reduced,
please proceed as follows:
Emptying the Dust Container
Press the button to release the
dust container and remove it from
the vacuum cleaner.
• Press the button on the side
of the container to empty its
contents.
• Then close the ap of the
dust container again.
05-BS 971 CB Neu.indd 33 01.04.2010 10:24:04 Uhr
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann bs 971 cb at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann bs 971 cb in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info