Manual Bomann BS 6027 A CB (page 47 of 86) (English, German, Dutch, French, Italian, Polish, Spanish)

814744

Zoom out

Zoom in

1/86

BS6027ACB_IM 05.06.19

When the charging process of the battery is completed,

you should disconnect the charger immediately. A charge

up to 90 % is considered best.

Conversely, it is also preserving the battery more when

it is not discharged to 0 %. If the possibility arises, you

should already recharge the battery when it is reaching a

charge state of 30 %.

• Storage: Always store batteries in a dry place and at

moderate temperatures between 10 °C and 20 °C.

Also consider the effect of self-discharge! When the

accumulator is already empty, this effect may lead to

a deep discharge resulting in damaging the battery. If

you intend to store the battery for an extended period of

time, you can counteract this effect. We then recommend

charging the battery to approx. 40 % before storage. You

should check the state of charge after not more than a

month.

Unpacking the Appliance

1. Remove the appliance from its packaging.

2. Check the delivery scope for completeness.

3. Check the appliance for any transport damage, in order

to prevent hazards.

NOTE:

In case of any transport damage, contact your dealer

immediately. Do not use a damaged appliance!

Overview of the Components /

Scope of Delivery

1 Indicator lights

2 ECO button

3 On / off button

4 Carrying handle

5 Power supply connection socket

6 Cover closure (Outlet lter)

7 Exhaust lter behind the cover

8 Motor housing / Hand set

9 Dust container

10 Base plate of the dust container

11 Opener / Locking of the base plate

12 Dust container latch MOVE

13 Floor nozzle with turbo brush

14 Floor nozzle release PUSH

15 Suction pipe

16 Suction pipe release PUSH

Wall Holder

17 Power supply connection socket

18 Slot for accessory holder

19 Slot for accessory holder

20 Charging contacts

21 Slot for accessory holder

Accessories

22 Mini special brush

23 Large brush nozzle / Upholstery brush

24 Crevice nozzle

Not Shown

3 × Accessory holder

1 × Power adapter

2 × Wall plug

2 × Screw

Notes for Use

• The appliance is especially suitable for quickly vacuum-

ing small amounts of dry dirt or dust.

• The appliance is operated via charged battery. Charging

is done via the supplied power adapter.

• Direct power supply via power adapter is not possible.

• This rechargeable battery vacuum cleaner is no

adequate replacement for a conventional oor vacuum

cleaner. Especially on shag-pile carpet, the cleaning

performance is not sufcient owing to its design.

• Contaminated lters reduce the suction power of the vac-

uum cleaner. Therefore, we recommend regular cleaning

of the existing dirt lters.

• Ideally, clean the lters whenever they have been subject

to a prolonged use.

• Please regularly check and clean the electric oor

nozzle.

• If necessary, clean heavily soiled oors multiple times

and / or use a conventional 230 V~ oor vacuum cleaner.

Switching the Appliance On / Off

• The button (3) turns the appliance on and off.

• Press the ECO button on the back of the handset to tog-

gle between low and high power levels. In ECO mode,

you can extend the life cycle of the rechargeable battery.

The ECO button is illuminated.

Start-Up

Suction Pipe

• Insert the suction pipe with the two contact pins into

the connection on the hand appliance. It must audibly

engage.

• To disconnect the suction pipe, press the release PUSH

(16) and pull out the pipe at the same time.

Floor Nozzle with Turbo Brush

• Stick the lower end of the suction pipe onto the connec-

tor on the oor nozzle. Note the contact pins on the oor

nozzle. The suction pipe must audibly s snap into place.

• To disconnect the suction pipe, press the release PUSH

(14) and pull out the pipe at the same time.

• The oor nozzle is suitable for all oor coverings except

for shag-pile carpets.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bomann BS 6027 A CB in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2.35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bomann BS 6027 A CB Manual

Product: