573569

BodySculpture BT-5405 Manual

20
Zoom out
Zoom in
Previous page
1/52
Next page
18
INCLINE▲、▼：Adjust the incline. Press the button to adjust incline section when run, and adjust
the data when stop.
INCLINE（3,6,9,）：Shortcut key for slope adjustment.
MAIN FUNCTION
Open the power switch, the window will light, the machine will enter into ready state.
1. START-UP QUICKLY (MANUAL):
Attached to the panel on the safety lock switch position.
Press START, the window display:3-2-1 and the buzzer beeps, then start the motor.
2 . COUNT DOWN MODE:
Press the ‘ MODE’ button, it can choose time countdown mode, distance count down mode,
calories countdown mode, and the window will show the default data and glitter. At the same time,
press “ SPEED+” “ SPEED-” to set the data. Press ‘ START ’ button, the machine will run at the
lowest speed, you can press “ SPEED+” “ SPEED-” to change the speed. When it counts down
to 0, the machine will stop smoothly. Certainly, you can press ‘ STOP’ button or take out the
safety key from the computer to stop the machine.
When Standby mode, press button “MODE” “Time” Window show“15：00”，press button
“SPEED+”、“SPEED-”、“INCLINE+”、“INCLINE-” could set the time，setting arrange: 5：00—99：
00.
Press “MODE” to get into the distance count down mode, “DISTANCE” window display
“1.00”, press button “SPEED+”、“SPEED-”、“INCLINE+”、“INCLINE-”could set running distance,
setting arrange：0.5—99.9
Press “MODE” to get into the calories count down mode, window display “50.0” ,press the
button “SPEED+”、“SPEED-”、“INCLINE+”、“INCLINE-”,could set calories, setting arrange：
10.0—999.0.
INNER INSTALL PROGRAM
Press ‘PROG’ button to choose the inner install program from P1----P15. When set the program,
the time window will show default data and glitter, press SPEED or INCLINE button to set the
running time. Each program has been divided into 20 section, Each exercise time=the setting
time/20. Press ‘START’, the machine will run at the first section speed. When the section is over,
it will enter into next section automatic, the speed will change as next section data. When finish
one program, the machine will stop smoothly. During the running, you can change the speed by
the “SPEED+”、“SPEED-” whenever, When the program enter next section will come back to the
current speed. And you can press ‘STOP’ or take out the safety key to stop the machine
whenever.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BodySculpture BT-5405 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BodySculpture BT-5405 in the language / languages: English as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info