573545

BodySculpture BSB-250 Ab Twister Manual

15
Zoom out
Zoom in
Previous page
1/17
Next page
- 12 -
down on the release. Give it a slight turn to keep the release open.
#3 - Endurance Program
Exercise Objective
This exercise increases the number of
repetitions by decreasing the resistance
level. As you build up your muscle
strength, the resistance level for the
endurance program will also increase
over time but should always be lower
than your current resistance for the
strength exercise program.
Critical Safety Points
The swing mechanisms must be locked as you get on the Twist Handler.
Keep your body in a “neutral spine position,” with the curves of your body remaining in their
natural position. Your body should feel comfortable, with no stress or strain.
Do not overextend to the extreme left or right during the workout. Only go as far as
comfortable while being able to maintain balance on the machine.
Suggested Time at Exercise #3 Level
Repeat daily, continue forward with this as your main exercise program.
Occasionally alternate with the muscle strength exercise program.
Number of Repetitions
Twenty each side. Total metered count of forty for lower and forty for upper.
Keys to Workout
Set the resistance control knob lower than your current level for the muscle strength exercises.
The resistance should be low enough to allow you to complete the repetitions, with the last
one or two being a slight challenge to finish.
Use your hips for the lower body workout and your torso for the upper body.
Resistance Control Setting
Begin by turning the resistance control knob counterclockwise. Adjust for your own strength
level, using as your guide the “Keys to Workout” listed above.
Handlebar Settings
Set parallel to the Twist Handler.
Once you are in position and ready to begin the upper body exercise, pull down on the
handlebar release. Give it a slight turn to keep the release open.
Knee Bar Settings
Once you are ready to begin the lower body exercise, reach under the knee bar and pull
down on the release. Give it a slight turn to keep the release open.
… 15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BodySculpture BSB-250 Ab Twister at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BodySculpture BSB-250 Ab Twister in the language / languages: English as an attachment in your email.

The manual is 1,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info