Manual BodySculpture BSB-250 Ab Twister (page 10 of 17) (English)

573545

Zoom out

Zoom in

1/17

- 7 -

STEP 4

• The safety bolt screwed into the end of the swing assembly, can be unscrewed

by hand. Caution: Always replace this bolt before getting on or using the Twist

Handler.

• Loosen and remove the safety bolt from the swing assembly.

• Turn the knee saddle knob counterclockwise several times to loosen the

release mechanism.

• Pull the saddle knob release mechanism back and slide the knee saddle

assembly onto the knee bar. The wider sides of the saddles must face the front

of the Twist Handler. NOTE: The cushioned saddle pad covers are optional

and can be removed if the additional padding is not desired.

• The knee bar position is adjustable to fit your torso length. Align the knob with

one of the positions on the knee bar and allow the release mechanism pin to

drop into the hole.

• IMPORTANT: Tighten the knee saddle knob by turning it clockwise. Replace

the safety stop bolt and tighten by hand.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of BodySculpture BSB-250 Ab Twister in the language / languages: English as an attachment in your email.

The manual is 1,86 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

BodySculpture BSB-250 Ab Twister Manual

Product: