573543
18
Zoom out
Zoom in
Previous page
1/21
Next page
15
RPM Displays current training rotation per minute.
SPEED Displays the current SPEED from 0.0 to maximum 99.9 km (or mile) per hour. ** RPM and SPEED will
switch display to another in every 6 seconds during training.
DISTANCE Count Up - The computer accumulates total workout distance from 0.00 to the max. 99.90 km or ml
during training.
Count Down - The monitor will count down from the preset to 0.00.
CALORIES Count Up- The computer accumulates the calories consumption from 0 to the max. 990 cal during
training.
Count Down - The computer will count down from the preset to 0.
This data is a rough guide for comparison of different exercise sessions that can not be used for
medical treatment.
WATT After training for a while, the monitor will display current workout watt.
PULSE During the measurement period, please do hold two hands to the handgrip sensors to get heart rate
display more precisely. The heart rate figure displays area is from 0 to 240 BPM. You may preset target
pulse to assist the training under manual mode or 6 profiles mode or User, or select a fixed target
percentage for training.
Alarm - If you preset the target pulse under training with Manual or other target the computer will alarm
to remind as soon as your current heart rate is achieved to the preset. Resistance level adjustment - If
you preset the target heart rate ( or select a target heart rate percentage), the resistance level will be
auto-adjusted according to your real heart rate figure compared with the preset target which is heart
rate control program.
RECOVERY After exercising for a period of time, keep holding on handgrip sensor, and press the "RECOVERY”
button, all function display will stop except "Time"
Time starts counting Time starts counting down from 00:60 -00:59 - 00:58 - to 00:00. As soon as 00:00 is
achieved, the bottom area of LCD will show your heart rate recovery status with grade F1, F2, F3….F6.
F1 is the best, and F6 is the worst.
You may keep exercising to improve the heart recovery status day by day from F6 up to F1.
** Press the RECOVERY button again to return the main display.
8.0 Notes
1. When there is no signal been transferred into the computer for 4 minutes, the LCD display will shut off automatically,
and all previous training data will be stored. You may press any button to have the computer restart working.
2. If the monitor display is improper, please remove the power supply and reconnect it again.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BodySculpture BE-6910 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BodySculpture BE-6910 in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info