581469
51
Zoom out
Zoom in
Previous page
1/56
Next page
49 G
Troubleshooting
If you experience this … then please check this…
Appliance cannot be switched
on or programme will not start
Has a programme been set?
Has the >Start/Pause< button been pressed?
Has the loading door been properly closed?
Open the loading door and push it with the palm
until you hear it lock into place.
Is power cable plugged in?
Is fuse for this socket intact?
Machine won't react to input Combination of additional functions not possible.
Is Child-proof lock activated? See "Child-proof lock".
Has a time delay been set?See "Time delay".
If the problem persists: Pull out the mains plug, wait
a few seconds, and insert plug back in.
>No water intake< indicator
lamp is glowing
Is water tap all the way open?
Is the inlet hose kinked?
Is water inlet strainer clogged? See "Cleaning and
care".
Is water pressure too low? Ask the responsible wa-
terworks.
Has Aquasafe or Aquasafe+ (depending upon mod-
el) been activated due to leakages?
Detergent or fabric conditioner
are not properly washed in
Is the detergent dispensing drawer or siphon
soiled? See "Cleaning and care".
Is softener too viscous? Add water.
Softener compartment (middle
compartment in the detergent
dispensing drawer) is full of
water at end of programme
Is the siphon clogged? See "Cleaning and care".
Detergent foams too much Is there too much detergent? Is load too small?
Is water too soft? Ask your local waterworks.
Water runs out (machine is "lea-
king")
Are hoses properly attached?
Is the foreign matter trap properly closed?
Is foam coming out as a result of too much deter-
gent?
Water does not drain, or drains
very slowly
Is Rinse hold set? See "Quick instructions for daily
use".
Is the drain hose kinked?
Appliance does not spin proper-
ly, or does not spin at all
Is Rinse hold set? See "Quick instructions for daily
use".
Is spin speed set too low or spin deselected?
Is the distribution of load nonuniform? See "Quick
instructions for daily use".
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blomberg WAF 1341 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg WAF 1341 in the language / languages: English, German as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info