581469
50
Zoom out
Zoom in
Previous page
1/56
Next page
G 48
4. Clean foreign object trap and the
pump opening. Check if the pump im-
peller (in the pump opening) can be
turned freely.
5. Replace the cap on the drain hose and
put it away.
6. Replace the foreign object trap and
turn it tight (in clockwise direction).
7. Close the service door.
Water inlet strainer
Clean if water flows very slowly, or not at
all.
1. Switch off the machine, turn off the
water tap.
2. Take the inlet hose off.
3. Pull out the strainer in Aquasafe or the
two strainers in Aquasafe+ (depending
on the model) with universal or needle
nosed pliers, clean with a small soft
brush and fit back.
4. Pull out the strainer in the back wall
(except in case of Aquasafe+) with uni-
versal or needle nosed pliers, clean
with a small soft brush and fit back.
5. Put inlet hose back on and tighten
"fingertight".
6. Turn the water tap on full and check
for leaks at the connections.
Decalcifying
It is not necessary to decalcify the machine
if the correct amount of detergent is used.
When necessary, use only a decalcify-
ing agent suitable for washing ma-
chines. Make sure to follow the in-
structions on the package.
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blomberg WAF 1341 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg WAF 1341 in the language / languages: English, German as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info