Manual Blomberg WAF 1300 (page 35 of 56) (English, German)

581467

Zoom out

Zoom in

1/56

1. If not already attached, manually

screw the bent end of the supply hose

tightly onto the rear panel of the ma-

chine (not in case of Aquasafe+).

2. Screw the Aquasafe or Aquasafe+ (de-

pending on the model) at the end of

the supply hose tightly onto the water

tap by hand.

The Aquasafe or Aquasafe+ (depend-

ing on model) turns off the water sup-

ply should a leakage occur in your

hose.

3. Turn the water tap all the way on and

check all connections for leaks; Turn

the water tap off again. Correct the

position of seals and screw couplings,

if necessary.

Connecting the water drain

You can hang the drain hose over the edge

of a wash basin, sink or bathtub – or con-

nect it permanently to a drain pipe (siphon

trap).

Important:

• Do not run the drain hose higher than

100 cm above floor level for the suds

pump to be able to pump out. Don't

go below the minimal height of

40 cm, otherwise water will come out.

• The water must be able to run off un-

hindered. Washbasins with a small

drain are not suitable.

• The end of the hose must not im-

merge in the pumped-out water.

• Check with customer service for hose

extensions. Do not use homemade ex-

tensions with hose clamps or similar!

• Use only the new hose supplied with

the machine, not an old existing one!

• Ensure that there are no sharp bends

in the hose!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg WAF 1300 in the language / languages: English, German as an attachment in your email.

The manual is 2,04 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Blomberg WAF 1300 Manual

Product: