582151
18
Zoom out
Zoom in
Previous page
1/48
Next page
18
EN
C
Child-proof Lock is deactivated when the machine
is switched off and on with On / Off button.
When the Child-proof Lock is activated:
Display symbols will not change even if the position
of Programme Selection knob is changed while the
machine is running or in halt.
If the Child-proof Lock is deactivated after
changing the position of the Programme Selection
knob while the machine is running, the machine
stops and new programme information is
displayed.
Changing the programme after it has
started
After the machine starts, you can change the selected
programme and dry your laundry in a different
programme.
1. If you want to select Extra Dry programme instead
of Iron Dry programme, press and hold the Start /
Pause / Cancel button for 3 seconds to cancel the
programme.
2. Select Extra Dry programme by turning the
Programme Selection knob.
3. Press Start / Pause / Cancel button to start the
programme.
C
You can also select a new programme by turning
the Programme Selection knob while the machine
is operating. In this case, current programme
is aborted and the new programme information
appears on the display.
Adding / removing laundry in Pause mode
In order to add or take out laundry after the drying
programme has started:
1. Press Start / Pause / Cancel button to switch the
machine to Pause mode. Drying process will stop.
2. While in Pause mode, open the loading door, add
or take out laundry and close the loading door.
3. Press Start / Pause / Cancel button to start the
programme.
C
Any laundry added after the drying process has
started may cause the clothes that are already
dried in the machine intermingle with wet clothes
and the result will be wet laundry after the drying
process is over.
C
You may repeat laundry adding or removing
process as many times as you desire during
drying. However, this process will increase the
programme time and energy consumption since
the drying process will be interrupted repeatedly.
Therefore, it is recommended to add laundry
before the drying programme has started.
C
If you select a new programme by turning the
Programme Selection knob while your machine
is in Pause mode, then the current program
is aborted and new programme information is
displayed.
Do not touch the inner surface of the drum when
adding or taking out laundry while a programme is
running. Surfaces of the drum are hot.
Canceling the programme
If you want to stop drying and cancel the programme
for any reason after the machine has started to run,
press and hold the Start / Pause / Cancel button for 3
seconds. Lint Filter Cleaning and Water Tank warning
symbols light up and “End” label appears on the display
as a reminder at the end of this period.
A
As the inside of the machine will be excessively
hot when you cancel the programme while the
machine is running, activate the ventilation
program to cool it down.
C
Machine will stop if you turn the Programme
Selection knob while it is operating. In this case,
current programme is aborted and the new
programme information appears on the display.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blomberg TKF 8451 G 30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg TKF 8451 G 30 in the language / languages: English, Finnish as an attachment in your email.

The manual is 6,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info