Manual Blomberg TKF 8451 G 30 (page 17 of 48) (English, Finnish)

582151

Zoom out

Zoom in

1/48

flash.

4. Press Start / Pause / Cancel button. The Time

Delay starts to count down. The Time Delay

symbol lights up. Start symbol appears. The “:” in

the middle of the displayed delay time will start

flashing.

Additional laundry may be loaded / taken out

during the Time Delay period. At the end of the

Time Delay countdown process, Time Delay

symbol disappears, drying process starts and the

programme duration is displayed. The time on the

display is the total of normal drying time and delay

time.

Time Delay is activated by pressing the Start / Pause /

Cancel button in the above display image.

Changing the delay time

If you want to change the time during countdown:

1. Press Start / Pause / Cancel button for 3 seconds

to cancel the programme. Repeat the Time Delay

procedure for the desired time.

2. Set the desired delay time with Time Delay + and -

buttons. The Time Delay symbol will flash.

3. Press Start / Pause / Cancel button. The Time

Delay starts to count down. The Time Delay symbol

lights up. Pause symbol disappears. Start symbol

appears.

4. The “:” in the middle of the displayed delay time

will start flashing.

Cancelling the Time Delay

If you want to cancel the Time Delay countdown and

start the programme immediately:

1. Press Start / Pause / Cancel button for 3 seconds

to cancel the programme.

2. Press Start / Pause / Cancel button to start the

programme you have previously selected.

Starting the programme

Press Start / Pause / Cancel button to start the

programme.

Start / Pause symbol will light up to indicate that the

programme has started and “:” symbol between the

remaining time will continue flashing.

Progress of programme

Drying

Iron

Wardrobe

(Extra)

Ventilation

Anti-

creasing

Progress of a running programme is indicated on the

display by means of a set of symbols.

At the beginning of each programme step, the relevant

symbol in the series of symbols will light up and thus, at

the end of the programme, all symbols will remain lit up.

The rightmost symbol on the display indicates the step

being carried out.

Drying

Drying symbol lights up in all programmes apart from

ventilation.

Iron Dry

Starts to illuminate when the dryness level reach Iron

Dry step.

Cupboard Dry

Starts to illuminate when the dryness level reach

Wardrobe Dry step.

Extra Dry

Starts to illuminate when the dryness level reach

Wardrobe Dry Extra step.

Ventilation

Ventilation symbol illuminates when the programme

comes to an end.

Anti-creasing symbol will illuminate at the end

of the programme if Anti-creasing function is

activated.

Child-proof Lock

Machine is equipped with a Childproof Lock which

prevents interfering with the current programme flow

by pressing any button. All buttons except the On / Off

button on the control panel are deactivated when the

Child-proof Lock is active.

In order to activate the Childproof Lock, press Audio

Warning and Anti-Creasing buttons simultaneously for

3 seconds.

To start a new programme after the current programme

is over or to interrupt the current programme, the

Child-proof Lock should be deactivated. Press the same

buttons for 3 seconds again to deactivate the Child-

proof Lock.

Lock symbol will appear on the display when the

Child-proof Lock is activated.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg TKF 8451 G 30 in the language / languages: English, Finnish as an attachment in your email.

The manual is 6,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Blomberg TKF 8451 G 30 Manual

Product: