581387
8
Zoom out
Zoom in
Previous page
1/31
Next page
8
Connections
Loudspeakers
Check the impedance of your speakers. When using a pair of speakers,
you can use types with an impedance of between 4 and 8 Ohms.
The red coloured speaker terminals are positive (+) and the black speaker
terminals are negative (-). Make sure correct polarity is maintained at
each speaker connector or the sound can become weak and “phasey”
with little bass.
Using bare wire connections
Prepare the speaker cords for connection by stripping off approximately
10mm (3/8”) or less of the outer insulation. More than 10mm could
cause a short circuit. Twist the wires tightly together so there are no
loose ends. Unscrew the speaker terminal, insert the speaker cable,
tighten the terminal and secure the cable.
Record out connection
The diagram below shows how to connect the amplier to a tape recorder
or other component with a record function. Please note that either of the
record outputs can be used (as they are both the same signal in parallel).
Note: All connections are made using standard loudspeaker cable.
Basic connection
The diagram below shows the basic connection of your unit to a CD
player and a pair of loudspeakers.
RightLeftRight Left
BA
RightLeftRightLeft
BA
Rec OutS5S4S3S2S1
Rec OutS5S4S3S2S1
Right
Left
USB Audio In
Right
Left
Loudspeaker Terminals
Power AC
Mains Voltage
Selector Switch:
115V/220-230V
AC~50/60Hz
Right
speaker
Amplier
CD player
Left
speaker
RightLeftRight Left
BA
RightLeftRightLeft
BA
Rec OutS5S4S3S2S1
Rec OutS5S4S3S2S1
Right
Left
USB Audio In
Right
Left
Loudspeaker Terminals
Power AC
Mains Voltage
Selector Switch:
115V/220-230V
AC~50/60Hz
Right
speaker
Amplier
Tape/MD player
left
speaker
Black
Black Black
BlackRed Red
Red Red
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blomberg GSN 1370 A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg GSN 1370 A in the language / languages: English, German as an attachment in your email.

The manual is 7,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info