626834

Blendtec TotalBlender Manual

6
Zoom out
Zoom in
Previous page
1/11
Next page
76
SECTION 4: INSTALLATION
1� Place the blender on a flat, clean, and dry surface�
2. Make sure a plug outlet is available within two feet of the blender motor.
3� Ensure the unit is turned off before plugging it into a separate receptacle�
4� Ensure that blender vents are unobstructed to allow proper cooling during use�
5� Turn unit on�
6� Place appropriate filled blender jar, with lid in place, onto blender base�
We recommend that surge protection be placed between the receptacle
and the blender motor�
SECTION 5: OPERATIONAL OVERVIEW
5.1 QUICK RECIPE INSTRUCTIONS – Use these steps to get started right away!
1. Choose a recipe from the included recipe book.
2� Gather all of the ingredients�
3� Load the blender jar as indicated in the recipe�
4. Attach the blender lid to the jar; ensure that it sits on the jar completely.
5. Turn on the main power switch located on the back of the blender
motor base in the lower right corner�
6. Place the blender jar onto the base, making sure the jar is secure and
fully seated on the motor base�
7� Press the indicated touch pad button from the recipe once (or as indicated
in the recipe)� You may press any button on the lower row to stop the cycle�
8� When cycle is complete, remove the blender jar from the motor base�
9� Remove the jar lid and serve as indicated in the recipe�
5.2 UNDERSTANDING THE TOUCHPAD BUTTONS (SEE FIGURE 3)
1. Automatic Cycles: The Blendtec Total Blender has labeled touchpad
buttons that represent automatic blending cycles for various needs�
These cycles have variable speed settings that will change during the
course of the cycle� This allows the blender to draw the contents into the
blending vortex, which creates the desired texture� The blender will run
its pre-programmed cycle and automatically shut off� If at any point you
want to stop the blender before it has completed its cycle press any lower
row button�
2. Manual Operation - Speed Up and Down Buttons: The speed buttons
allow you to manually control the blender and choose any of the available
10 speed settings� Simply press the Speed Up button and the motor will
start� Continue pressing the Speed Up button to increase the speed, or
press the Speed Down button at any time to decrease speed� After you
have reached the desired speed, release the button� Once you press a
speed button, the blender will begin to run at the selected speed, and
then shut off automatically after 50 seconds� To stop the cycle before the
50 seconds, press any button on the lower row�
3. Manual Operation – Pulse Button: The Pulse button is used when you
want to chop, mince, whip, or do other momentary tasks which do not re-
quire a long blend cycle� When the Pulse button is pushed the motor will
run only while the button is held down� As soon as the button is released
the motor will shut off�
5.3 ALL ABOUT BLEND CYCLES (SEE FIGURE 4)
1. WHY BLEND CYCLES? In the world of professional blending, there are
many factors which go into making a delicious and consistent blend-
ed product� In order to blend many different recipes consistently well,
Blendtec developed blend cycles to match the blending needs of the
product being made� Because different ingredients have different blend-
ing characteristics, each ingredient needs to be considered� Some things
which are thicker or more brous will take longer to blend and need to be
blended at higher speeds� It is from that world of professional results that
the Total Blender derives its heritage�
2. WHAT CYCLES ARE ON MY TOTAL BLENDER? The Total Blender has 6
carefully designed and selected, pre-programmed blend cycles to
produce optimum results for a wide range of blending tasks. These
include Ice Cream, Frozen Yogurt, Ice Crush, Milkshakes, Soups, Syrups,
Fondues, Sauces, Dips, Dressings, Batters, Whole Juice, and Smoothies�
The recipe book included with your machine will refer to a specic button
to use, depending on what is being made� Feel free to experiment and
try different cycles with your own recipes� The following charts correspond
to the 6 buttons above on the touch pad (see figure 4)� The charts will
show the speeds and duration of time which make up each pre-
programmed blend cycle� This may be helpful to you in understanding
what the Total Blender is doing when a specific cycle button is pushed�
3. HOW WILL BLEND CYCLES HELP MY RECIPES? The Total Blender was
designed with many different food items in mind and blend cycles make
it produce consistent results across a wider range of food items than any
other home blender� This is why you will hear the blender speeding up
and slowing down at different times throughout the various blend cycles�
Based on the type of foods the blend cycle is designed to handle, it will
FIGURE 3
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blendtec TotalBlender at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blendtec TotalBlender in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Blendtec TotalBlender

Blendtec TotalBlender User Manual - English, German, French, Spanish - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info