32
1.4 NEVER OPERATE THE BLENDER IF IT APPEARS DAMAGED
If the blender malfunctions, call your service agent first� If it is dropped or
damaged in any way, return the blender to a Blendtec service agent
immediately for examination, repair, electrical or mechanical adjustment, or
possible replacement�
1.5 NEVER OPERATE BLENDER IN LIQUID
To protect against the risk of electrical shock do not put the motor base in
water or other liquid� Do not use the blender outdoors where it is subject
to precipitation�
1.6 NEVER PUT NON-FOOD ITEMS INTO JAR
Utensils, rocks, and glass are dangerous if placed in jar. Damage caused by
such foreign objects will void the warranty� Keep hands and utensils out of
jar while blending to reduce the risk of severe injury to persons or damage
to the blender� Utensils may only be used when the blender is not running�
1.7 NEVER OPERATE THE BLENDER WITHOUT THE LID IN PLACE
1.8 NEVER OPERATE THE BLENDER USING ATTACHMENTS NOT SOLD
BY BLENDTEC
The use of any unauthorized attachments may cause re, electric shock,
and/or injury and will void the warranty�
1.9 BLENDER JAR MUST BE PROPERLY IN PLACE WHILE APPLIANCE
IS OPERATING
1.10 BLADES ARE SHARP! HANDLE CAREFULLY!
1.11 WARNING, DO NOT BLEND HOT LIQUIDS OR OTHER HOT INGREDIENTS
1.12 USE CAUTION WHEN BLENDING ON THE SOUP CYCLE
When blending on the soup cycle, friction of the blade will heat the con-
tents� The vented lid will allow pressure relief� Be careful not to come in
contact with any steam coming from the clear center lid�
1.13 POWER CORD PRECAUTIONS
• NEVER operate with a damaged cord or plug. If the supply cord is damaged
it must be replaced by the manufacturer or authorized service agent to avoid
a hazard�
• DO NOT permit the cord to hang over the edge of the work surface.
• NEVER use an extension cord with the unit.
• Unplug the blender motor when not in use, before changing blender locations,
or cleaning�
1.14 NEVER ATTEMPT TO REPAIR THE POWER UNIT
Never remove the blender motor cover� The blender motor does not con-
tain self-adjustable or serviceable parts� A qualified service agent must
make all service adjustments. Removing the cover or attempting to ser-
vice the blender will void the warranty�
1.15 TURN THE POWER SWITCH OFF WHEN NOT IN USE
The Power Switch (ON/OFF switch) is located on the back of the blender motor cover.
1.16 AVOID TOUCHING THE BLENDER DRIVE SOCKET AFTER EXTENSIVE USE
The blender drive socket may become hot after numerous cycles.
1.17 SAFETY
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction con-
cerning use of the appliance by a person responsible for their safety� Children
should be supervised to ensure that they do not play with the appliance�
1.18 THE TOTAL BLENDER IS INTENDED FOR HOME USE ONLY! ANY USE
OF THE TOTAL BLENDER FOR COMMERCIAL PURPOSES VOIDS
ALL WARRANTIES
1.19 NEVER OPERATE THE BLENDER WITH MORE THAN THE MARKED
CAPACITY OF THE JAR
SAVE THESE INSTRUCTIONS
SECTION 2: UNPACKING
SAVE ALL PACKAGING MATERIALS AND INSTRUCTIONS FOR FUTURE USE
2.1 UNPACKING YOUR BLENDER
You should have received the following items:
• TOTAL BLENDER™ motor base
• Blender jar with lid
• Recipe book
• Owner’s manual
