Manual Blaupunkt WiFi LampCam HOS-X20 (page 6 of 67) (German)

699020

Zoom out

Zoom in

1/67

English

3.4. LampCam Installation

Step 1:

Please make sure you have turned OFF the power

from the circuit breaker before this step.

Step 2:

Find the desired installation location for the

LampCam. The installation location needs to have

220V AC wires (grounding, phase and neutral wire).

(e.g. of a previously installed Outdoor Lamp.)

Step 3:

Place the included installation positioning map on

the wall and mark with a pencil the two holes that

need to be drilled.

Step 4:

Drill the 2 mounting holes on the wall. Take

the plastic dowels included in the installation

accessories set and insert them into the 2 holes that

where just drilled.

Step 5:

Perforate a small hole with a sharp object at

position in the rubber pad and lead the AC

wires from the wall through the back of the

mounting bracket to the terminal blocks.

Step 6:

Lead the AC wires from the wall through the back

of mounting bracket and connect them in the

following way:

- Phase wire (brown) to terminal block

with brown cable.

- Neutral wire (blue) to terminal block

with blue cable.

- Protective earth wire (Yellow/Green): Leave it

hanging out, it will be connected in Step 8.

Now place the terminal block back into the

mounting bracket.

Step 7:

Take the screws included in the installation

accessories set and fasten the mounting bracket to

the wall. Make sure that the “UP” sign is at the top.

O

terminal blocks

IMPORTANT:

Setup and installation of the LampCam should

only be performed by a person with adequate

knowledge in handling electricity power.

DO NOT attempt installation if you do not

possess required skill.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt WiFi LampCam HOS-X20 in the language / languages: German as an attachment in your email.

The manual is 4,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Blaupunkt WiFi LampCam HOS-X20 Manual

Product: