699020
5
Zoom out
Zoom in
Previous page
1/67
Next page
5
English
3.1. IMPORTANT – Read before installing
3. Installation
NOTE:
The Micro SD card is mandatory for local recording. Please make sure the MicroSD is CLASS10 rated.
Supported are MicroSD cards from 8GB to 128GB.
Before the installation, please make sure the make sure the wall structure / installation surface can at
least support 3x weight of the LampCam.
Check your Wi-Fi signal strength. To make sure that your LampCams connection is as stable as
possible, make sure that the Wi-Fi signal is very strong at the location of your LampCam. The
suggested Internet bandwidth is 1Mbps (upload/download speed).
Recommendation: Avoid the lens aiming directly into the sunshine and if possible install the
LampCam under a roof or eave (Pic.1) or a position which oers a good protection against heavy
rain.
If you desire to install a microSD card we recommend doing it before the installation process. Please
refer to microSD card installation for more information.
For best performance, please install the LampCam at a height of 2.5 meters. (Pic.2)
3.2. Micro SD Card installation
Step 1:
At the bottom of the LampCam open the compartment by
unscrewing the screw .
Step 2:
Install the SD-Card into the indicated SD-card slot.
Step 3:
Close the compartment by placing the cover and fasting the screw.
2.5m Hight
Motion Detection 90°
A
A
Pic.1 Pic.2
3.3. Optional: Pre-Installation testing of the LampCam
Before installing it is possible to turn ON the LampCam via the micro USB port with a power bank or 2A
micro USB power supply. Wait until the LampCam makes a double beep tone and the Blue LED indicator
at the bottom of the LampCam starts ashing. (This process would take around 60 seconds, make sure the
LED is ashing in blue). Then refer to chapter “4.1. Learn in a LampCam”.
Note: The led light of the LampCam won’t turn on when connected via USB.
5m PIR Detection Range
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt WiFi LampCam HOS-X20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt WiFi LampCam HOS-X20 in the language / languages: German as an attachment in your email.

The manual is 4,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info