698409
9
Zoom out
Zoom in
Previous page
1/108
Next page
5
RVC701
corresponding plates on the charging station.
4. The display will show 1111 indicating that charging is in process.
5. When charging is complete, the display will show FULL.
Tips:
The first charging should take 12 hours.
Charge the robot as soon as possible after the battery has been discharged.
If the robot is not to be used for a long time, make sure the battery is not discharged.
ROBOT ACTIVITY MODES (STATES)
- off: the robot is switched off with the main switch and does not consume power. It will not charge in
the charging station.
- standby state: this state will be reached after the robot is stopped by using the on/off button or the
robot is woken up from sleep with the on/off button
- sleep state: the robot will automatically go to sleep after two minutes of inactivity or 10 minutes if it is
connected to WiFi and the application is being used.
Battery power consumption in sleep mode is reduced. Press and hold the on/off button for 6 seconds
to enter sleep mode.
DEVICE START-UP
Prepare the surface of the room to be cleaned. Remove sensitive objects, cables, sheets of paper. Raise
backdrops, curtains, and drapes hanging to the floor. Cover delicate furniture.
Press the power button to start the robot vacuum cleaner. The robot will start to move and vacuum in
automatic mode.
You can change the vacuum modes with the remote control when the vacuum cleaner is in standby
mode or vacuuming. Press the Mode button to change the vacuum mode.
1111 – Spot cleaning
2222 – Automatic cleaning
3333 – Cleaning along the edges
4444 – Zigzag mode
The vacuum power can be changed by pressing the MAX button on the remote control.
CONTROLLING THE ROBOT
1. Remote robot control
When the robot is in standby mode, it can be moved by pressing the arrow buttons on the remote
control, corresponding to the directions of movement.
2. Programming the schedule using the robot's control panel
A. Setting the robot's system clock
A1. Press the PLAN button, the robot will display the currently set time.
A2. Two left digits will start flashing (hour). You can increase their value by pressing the HOME” button.
Press the power button to set the minutes.
A3. Two right digits will start flashing (minutes). You can increase their value by pressing the HOME”
button.
A4. Press the power button to save the changes. Press the PLAN button to exit the time setting
mode.
B. Setting the scheduled cleaning time
B1. Hold the “PLAN button for 5 seconds. The last two digits will start flashing.
B2. Select the schedule number by pressing the HOME button. Each press of the HOME button will
increase the value by one. Confirm with the power button .
B3. Then set the desired hour and minutes.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt RVC701 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt RVC701 in the language / languages: English, German, Polish as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info