698409
8
Zoom out
Zoom in
Previous page
1/108
Next page
4
1. Control panel
1a. Power button
1b. HOME button
1c. PLAN button
1d. Display
2. Large pull-out dust bin
2a. Bin cover
2b. Bin opening lock
2c. HEPA filter
2d. Prefilter
3. Pull-out dust bin with an integrated water tank
3a. Water inlet
3b. Water pump
3c. Dust bin handle
3d. Dust bin latch
3e. HEPA filter
4. Bumper
5. Front wheel
6. Drive wheels
7. Collector brushes
8. Suction opening
9. Main collector brush
BEFORE FIRST USE
1. Remove all the paper, carton and foil protecting the vacuum and its parts.
2. Install the collector brushes. Press the brush marked with L or R into the appropriate location
marked L or R.
3. Make sure that the main collector brush is installed correctly.
4. Put the dust bin in the robot.
5. Place the charging station in a convenient location and connect it to the mains. It is
recommended to leave a free space around the station, 1 meter to the sides and 2 meters at the front.
6. Charge the device battery according to the instructions.
CHARGING THE DEVICE
1. Plug the power supply plug into the charging station, then plug the power supply into an electrical
socket. A blue LED will indicate that the station is correctly connected.
2. Switch the vacuum cleaner on with the main switch.
3. Place the robot vacuum cleaner on the charging station so that the charging connectors touch the
RVC701
10. Main collector brush cover
11. Surface-edge sensors (Anti-fall)
12. Main switch
13. Charging socket
14. Robot charging connectors
15. Charging station
16. Remote control
16a. Display
16b. HOME button
16c. Direction buttons (allow the robot to
move in the indicated directions; only
works in standby mode)
16d. MAX button
16e. CLK button – sets the robot's timer
16f. PLAN button – allows you to schedule
the robot's operating hours
16g.ON/OFF button – once pressed, the
robot starts cleaning or enters standby
mode
16h. MODE button – allows you to select
the operating mode
Input amperage: max. 400mA
Output voltage: 24V
Output amperage: 600mA
1m
1m
2m
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt RVC701 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt RVC701 in the language / languages: English, German, Polish as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info