686553
30
Zoom out
Zoom in
Previous page
1/44
Next page
en Automatic safety cut-out
30
Setting the correct time
Use the
0 symbol to select the kitchen timer and reset
the time.
bAutomatic safety cut-out
Automatic safety cut-out
If a hotplate has been switched on for a long time
without the setting being changed, the automatic time
limit is activated.
The hotplate stops heating. ”‰ and the /œ residual
heat indicator flash alternately on the hotplate display.
The display goes out when you touch any control. You
can make new settings.
When the time limit is activated depends on the heat
setting selected (1 to 10 hours).
kWipe protection
Wipe protection
If you wipe over the control panel while the hob is
switched on, settings may be changed.
To prevent this from happening, your hob has a wipe
protection function. Touch the Ö symbol. A beep goes
off. The display light above the Ö symbol lights up. The
control panel is locked for 30 seconds. You can now
wipe over the control panel without changing any
settings.
Note: The primary switch is not affected by the wipe
protection function. You can switch off the hob at any
time.
[Energy consumption
indicator
Energy consumption indicator
You can use this function to display the total energy
consumption between switching the hob on and off.
Once switched off, the energy consumption is displayed
in kilowatt hours (e.g. 1.08 kWh) for 10 seconds
The accuracy on the display depends on the voltage
quality of the power supply, among other factors.
The display has not been activated. You can find out
how to activate the display in the Basic settings
section.~ Page 30
QBasic settings
Basic settings
Your appliance has various basic settings. You can
adjust these settings to meet your own needs.
J
N:K
Display Function
™‚
Automatic child safety lock
Switched off.*
Switched on.
ƒ
Manual and automatic child safety lock switched off.
™ƒ
Beep
Confirmation signal and operation error signal are
switched off (primary switch signal always remains).
Only the operation error signal is switched on.
ƒ
Only the confirmation signal is switched on.
Confirmation signal and operation error signal switched
on.*
™„
Energy consumption display (Ask your electric com-
pany what the mains voltage is)
Consumption display switched off.*
Consumption display with mains voltage at 230 V.
ƒ
Consumption display with mains voltage at 400 V.
Consumption display with mains voltage at 220 V.
Consumption display with mains voltage at 240 V.
™†
Automatic timer
‹‹
Switched off.*
‹‚-ŠŠ
Cooking time after which the hotplates switch off.
™‡
Duration of the timer end signal
10 seconds.*
ƒ
30 seconds
1 minute.
™ˆ
Activation of the heating elements
Switched off.
Switched on.
ƒ
Last setting before the hotplate was switched off.*
™Š
Selected time for the hotplate
Unlimited: the most recently selected hotplate can always
be adjusted without having to select it again.*
Once you select a hotplate, you have 10 seconds to adjust
it, after which you will have to select it again in order to be
able to adjust it.
*Basic setting
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt 5RF64351 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt 5RF64351 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Blaupunkt 5RF64351

Blaupunkt 5RF64351 Installation Guide - All languages - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info