315942
7
Zoom out
Zoom in
Previous page
1/12
Next page
7
Keep a firm grip on the appliance, and
especially the hose, when switching on
and during use.
Using the inflator adaptors (fig. H)
Choose the appropiate adaptor for
the item to be inflated.
During inflation, the airflow can be
adjusted by covering the hole (21)
with your thumb.
Do not over-inflate or exceed the
recommended pressure of the item to
be inflated.
Warning! The hole in the inflator adaptor
acts as a relief valve to prevent over-
inflating. Do not permanently cover the
hole.
Resetting the motor thermal
safeguard
The motor of the appliance is fitted with a
thermal safeguard. This device
automatically switches the appliance off
in case of overheating. If this occurs,
proceed as follows:
Switch the appliance off and remove
the plug from the wall socket.
Allow the unit to cool. When the unit
has cooled down, check and clean
the filters.
Re-insert the plug in the wall socket
and switch the appliance on.
Cleaning and maintenance
Warning! Regularly clean the filters.
Cleaning the dust bowl and filters
(fig. E & I - M)
When the dirt bowl is full or the filters are
clogged, a coloured indicator becomes
visible in the looking glass (3). When this
happens, check the appliance for clogs,
empty the dirt bowl and clean the filters.
The filters are re-usable and should be
cleaned regularly.
Press the release button (2) and
remove the dust bowl (4) (fig. I).
Empty the dust bowl.
Depress the latch (22) and remove
the filter holder (23) (fig. J).
Remove the filter (24) from the filter
holder (fig. K).
Brush any loose dust off the filter.
Wash the filter in warm, soapy water.
The bowl and the filter holder can
also be washed if necessary. Do not
immerse the appliance in water.
Make sure the dust bowl, filter holder
and filter are completely dry.
Refit the filter and the filter holder
(fig. L).
Refit the dust bowl onto the
appliance. Make sure the dust bowl
clicks into place (fig. M).
Cleaning the exhaust filter (fig. E)
Open the exhaust filter holder (17).
Remove the filter from the filter holder.
Wash and dry the filter as described
above.
Refit the filter and close the exhaust
filter holder.
Warning! Never use the appliance
without the filters. Optimum dust
collection will only be achieved with clean
filters and an empty dust bowl. If dust
begins to fall back out of the appliance
after switching it off, this indicates that
the dust bowl is full and must be emptied.
Replacing the filters
The filters should be replaced every 6 to
9 months and whenever worn or
damaged. Replacement filters are
available from your Black & Decker
dealer (cat. no. VHF70).
Remove the old filters as described
above.
Fit the new filters as described above.
Storage (fig. N)
Wrap the power supply cord around
the appliance and clip the plug to the
cord.
Store the appliance in a dry location.
Protecting the environment
Z
Separate collection.
This product must not be
disposed of with normal
household waste.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker vh 780 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker vh 780 in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info