581128
5
Zoom out
Zoom in
Previous page
1/60
Next page
5
ENGLISH
Electrical safety
This tool is double insulated; therefore no earth wire
is required. Always check that the power supply
corresponds to the voltage on the rating plate.
Additional safety instructions for hand-held saws
Always use the appropriate type of saw blade for the
workpiece material and type of cut.
Only use saw blades in perfect condition.
Always switch the tool off and wait for the saw blade to
come to a complete standstill before putting the tool down.
Keep your hands well clear of the saw blade while working.
Whenever possible, use clamps or a vice to secure the
workpiece.
Do not use the tool while in a tree, on a ladder or on any
other unstable surface.
When cutting branches be aware of where the branch will
fall.
Hearing protection should be worn when using this
tool.
Features
This tool includes some or all of the following features.
1. On/off switch
2. Lock-off button
3. Speed control wheel
4. Blade holder
5. Blade changing button
6. Shoe
7. Shoe locking button
In addition, this tool is supplied with some or all of the
following accessories (fig. A):
Assembly
Warning! Before attempting any of the following operations,
make sure that the tool is switched off and unplugged and
that the saw blade has stopped.
Fitting the saw blade (fig. B)
Hold the saw blade securely. If the saw blade is fitted
with a tooth protector, leave it attached while fitting the
blade.
Depress the blade changing button (5).
Insert the shank of the saw blade into the blade holder (4)
as far as it will go.
Release the blade changing button.
Remove the tooth protector, if fitted.
Note: This tool has been designed to allow the saw blades to
be fitted with the teeth facing forward or backward.
Removing and fitting the shoe (fig. C)
The shoe can be removed for cleaning the tool or for fitting the
circle and edge guide.
Hold the tool as shown.
Depress the shoe locking button (7) and slide the shoe (6)
away from the tool.
Release the shoe locking button.
To fit the shoe:
Depress the shoe locking button and slide the shoe into
the slots.
Release the shoe locking button and make sure that the
shoe is securely attached to the tool.
Fitting the circle cutter / edge guide (fig. B, C, D & E)
Remove the saw blade from the blade holder (4).
Remove the shoe (6).
Accessory Recommended application and use Sawblade orientatien
8. 24 tpi recip blade Cutting metal Teeth facing back
9. 6 tpi curved teeth Fast cutting of wood and plastic Teeth facing back
10. 6 tpi straight teeth Dry wall (plaster board) Teeth facing back
11. Ground set recip blade Pruning Teeth facing back
12. Circle cutter / edge guide
13. 18 tpi wavy, milled blade Cutting metal Teeth facing forward
14. 6 tpi set, milled blade Fast cutting of wood Teeth facing forward
15. 10 tpi set, milled blade Cutting plastic Teeth facing forward
16. 10 tpi scroll, milled set Scroll cutting Teeth facing forward
Note: tpi = teeth per inch
Warning! When using the dry wall blade to cut into walls or ceilings, make sure to check for the location of wiring and pipes
near the cutting area.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker KS990EK T1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker KS990EK T1 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info