580991
7
Zoom out
Zoom in
Previous page
1/72
Next page
7
ENGLISH
Loosen the screws (9).
Pull the shoe plate (4) forward, rotate the shoe
plate (4) to the left or right and push it back
into the 45° location.
Tighten the screws (9).
To reset the shoe plate for straight cuts:
Loosen the screws (9).
Pull the shoe plate (4) forward, rotate to the
centre and push it back into the 0° location.
Tighten the screws (9).
Variable speed control
The tool has a variable speed on/off switch (1).
The operating speed depends on how far you
press the switch.
Use a high speed for wood, medium speed for
aluminium and PVC and low speed for metals
other than aluminium.
Switching on and off
To switch the tool on, press the variable speed
on/off switch (2).
To switch the tool off, release the variable
speed on/off switch (2).
For continuous operation, press the lock-on
button (1) and release the on/off switch (2).
To switch the tool off when in continuous
operation, press the on/off switch (2) and
release it.
Sawing
Hold the tool rmly with both hands while cutting.
The shoe plate (4) should be held rmly against
the material being cut. This will help prevent the
saw from jumping, reduce vibration and minimise
blade breakage.
Let the blade run freely for a few seconds
before starting the cut.
Apply only a gentle pressure to the tool while
performing the cut.
Hints for optimum use
Sawing laminates
When cutting laminates, splintering may occur
which can damage the presentation surface. The
most common saw blades cut on the upward
stroke, therefore if the shoe plate is sitting on the
presentation surface either use a saw blade that
cuts on the downward stroke or:
Use a ne-tooth saw blade.
Saw from the back surface of the workpiece.
To minimise splintering, clamp a piece of
scrap wood or hardboard to both sides of the
workpiece and saw through this sandwich.
Sawing metal
Be aware that sawing metal takes much more
time than sawing wood.
Use a saw blade suitable for sawing metal.
When cutting thin sheet metal, clamp a piece
of scrap wood to the back surface of the
workpiece and cut through this sandwich.
Spread a lm of oil along the intended line of
cut.
Maintenance
Your Black & Decker tool has been designed to
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory
operation depends upon proper tool care and
regular cleaning.
Regularly clean the ventilation slots in your
tool using a soft brush or dry cloth.
Regularly clean the motor housing using
a damp cloth. Do not use any abrasive or
solvent-based cleaner. Never let any liquid get
inside the tool and never immerse any part of
the tool into liquid.
Protecting the environment
Separate collection. This product must
not be disposed of with normal household
waste.
Should you nd one day that your Black & Decker
product needs replacement, or if it is of no further
use to you, do not dispose of it with household
waste. Make this product available for separate
collection.
Separate collection of used products and
packaging allows materials to be recycled
and used again. Reuse of recycled
materials helps prevent environmental
pollution and reduces the demand for raw
materials.
Local regulations may provide for separate
collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
Black & Decker provides a facility for the
collection and recycling of Black & Decker
products once they have reached the end of their
working life. To take advantage of this service
please return your product to any authorised
repair agent who will collect them on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your local
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker KS777 T1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker KS777 T1 in the language / languages: Polish, Turkish as an attachment in your email.

The manual is 2,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker KS777 T1

Black Decker KS777 T1 Quick start guide - English - 12 pages

Black Decker KS777 T1 User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info