Manual Black Decker KR580CRE T4 (page 24 of 68) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish)

601820

Zoom out

Zoom in

1/68

• The forward/reverse switch controls the direction of

rotation when your drill is used as a screwdriver, or

when clearing a jammed drill bit.

• The adjustable depth stop gives precise control of

the hole depth, when you drill blind holes.

FITTING THE DRILL BIT (KEYLESS CHUCKS)

Proceed as follows:

Disconnect the plug from the electricity supply.

While pressing

the spindle lock,

rotate the chuck

until the jaws are

sufficiently open.

Insert the drill bit

in the jaws of the

chuck and

tighten. Twist the

chuck firmly to securely grip the drill bit.

FITTING THE DRILL BIT (KEYED CHUCKS)

Proceed as follows:

Disconnect the plug from the electricity supply.

Rotate the barrel

of the chuck until

the jaws are

sufficiently open.

Insert the drill bit

in the jaws of the

chuck. Insert the

chuck key with

the end of the

chuck key in one of the three holes in the body of the

chuck, ensuring the head of the chuck key is engaged

with the barrel of the chuck. Turn the chuck key

clockwise to tighten the jaws and securely grip the drill

bit. Remove the chuck key.

REMOVING THE CHUCK (KEYLESS CHUCKS)

Proceed as follows:

To remove the chuck, open the jaws, hold it firmly in

one hand and with a screwdriver held in the other hand,

turn the set-screw in the chuck clockwise

approximately one turn, to loosen it.

Place an allen

key in the chuck

and tighten the

jaws. Give the

allen key a short

powerful blow in

an anti-clockwise

direction with a

hammer to loosen the chuck on the spindle. Remove

the allen key. Use the screwdriver to turn the set-

screw clockwise until it totally disengages from the

spindle. Remove the chuck from the spindle by rotating

it anti-clockwise. To fasten the chuck, put it on the

thread and turn it clockwise until it stops. Put in the

screw and turn it anti-clockwise until absolutely firm.

REMOVING THE CHUCK (KEYED CHUCKS)

To remove the

chuck, open the

jaws of the chuck

with the chuck

key. Hold the

chuck firmly in one

hand, and with a

screwdriver turn

the set screw in

the chuck clockwise with the other hand until it comes

out. Use only the correct chuck key. Place the chuck

key into the chuck, and hold the drill firmly in one hand

with the chuck pointing away from you. Rotate the

chuck so that the chuck key is just above the horizontal

position on the right hand side of the machine. Give the

crossbar end of the key a sharp downward blow with a

mallet or light hammer. The chuck should now be

sufficiently loose to be unscrewed by hand.

FITTING THE SIDE HANDLE

Loosely locate

the handle on the

body of your drill.

Rotate the handle

around the body

of your drill until it

is in the desired

position. Tighten

the handle by

turning clockwise.

SETTING THE ADJUSTABLE DEPTH STOP

Proceed as follows:

Fit the drill bit. Loosen the side handle.

Slide the depth

stop until the end

of the depth stop

aligns with the

end of the drill bit.

Slide the depth

stop until the

distance between

the end of the

ENGLISH

KR580-700 ML p21-35 05-02-2001, 10:4824

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker KR580CRE T4 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker KR580CRE T4 Manual

Product: