Manual Black Decker KC9024 (page 8 of 76) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian)

497046

Zoom out

Zoom in

1/76

ENGLISH

Charging the battery (fig. C)

The battery needs to be charged before first use

and whenever it fails to produce sufficient power

on jobs that were easily done before.

When charging the battery for the first time,

or after prolonged storage, it will only accept an

80% charge. After several charge and discharge

cycles, the battery will attain full capacity.

The battery may become warm while charging;

this is normal and does not indicate a problem.

Do not charge the battery at ambient

temperatures below 4 °C or above 40 °C.

Recommended charging temperature:

approx. 24 °C.

◆ To charge the battery, insert the charger plug

(7) into the connector (3).

◆ Plug in the charger. Switch on at the mains.

◆ Leave the tool connected to the charger for at

least 12 hours.

The tool can be left connected to the charger

indefinitely. The charger may hum and become

warm while charging; this is normal and does not

indicate a problem.

◆ Before using the tool, unplug the charger and

disconnect the tool from the charger.

Do not use the tool while it is connected

to the charger.

Operating the tool (fig. D)

◆ To tighten a screw or nut, slide the on/off

switch (1) to the right and press it.

◆ To loosen a screw or nut, slide the on/off

switch (1) to the left and press it.

◆ To switch the tool off, release the on/off switch.

Hints for optimum use

◆ Always use the correct type and size of

screwdriver bit.

◆ If screws are difficult to tighten, try applying a

small amount of washing liquid or soap as a

lubricant.

◆ Use the spindle lock to loosen very tight

screws or to firmly tighten screws.

◆ Always hold the tool and screwdriver bit in a

straight line with the screw.

◆ When screwing in wood, it is recommended to

drill a pilot hole with a depth equal to the

length of the screw. A pilot hole guides the

screw and prevents splintering or distortion of

the wood. For the optimum size of the pilot

hole, refer to the table below.

◆ When screwing in hardwood, also drill a

clearance hole with a depth equal to half the

length of the screw. For the optimum size of

the clearance hole, refer to the table below.

Screw size No. 6 No. 8 No. 10

(3.5 mm) (4 mm) (6 mm)

Pilot hole ø

(softwood) 2 mm 3.2 mm 3.5 mm

Pilot hole ø

(hardwood) 2.5 mm 3.5 mm 4.0 mm

Clearance hole 4 mm 5.0 mm 5.7 mm

MAINTENANCE

Your Black & Decker tool has been designed to

operate over a long period of time with a

minimum of maintenance. Continuous satisfactory

operation depends upon proper tool care and

regular cleaning.

Your charger does not require any maintenance

apart from regular cleaning.

Unplug the charger before cleaning it.

◆ Regularly clean the ventilation slots in your tool

using a soft brush or dry cloth.

◆ Regularly clean the motor housing using a

damp cloth. Do not use any abrasive or

solvent-based cleaner.

PROTECTING THE ENVIRONMENT

Tools

Should you find one day that your tool

needs replacement, or if it is of no further

use to you, think of the protection of the

environment. Black & Decker repair agents

will accept old Black & Decker tools and

ensure that they are disposed of in an

environmentally safe way.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker KC9024 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian as an attachment in your email.

The manual is 0,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker KC9024 Manual

Product: