381442
11
Zoom out
Zoom in
Previous page
1/104
Next page
11
ENGLISH
A pilot hole guides the screw
and prevents splintering or
distortion of the wood. For the
optimum size of the pilot hole,
refer to the table below.
When screwing in hardwood,
also drill a clearance hole with
a depth equal to half the
length of the screw. For the
optimum size of the clearance
hole, refer to the table below.
Screw size Pilot hole ø
(softwood)
No. 6 (3.5 mm) 2 mm
No. 8 (4 mm) 3.2 mm
No. 10 (5 mm) 3.5 mm
Screw size Pilot hole ø
(hardwood)
No. 6 (3.5 mm) 2.5 mm
No. 8 (4 mm) 3.5 mm
No. 10 (5 mm) 4.0 mm
Screw size Clearance
hole
No. 6 (3.5 mm) 4 mm
No. 8 (4 mm) 5.0 mm
No. 10 (5 mm) 5.7 mm
MAINTENANCE
Your Black & Decker tool has
been designed to operate over a
long period of time with a
minimum of maintenance.
Continuous satisfactory operation
depends upon proper tool care
and regular cleaning.
Your charger does not require
any maintenance apart from
regular cleaning.
Unplug the charger before
cleaning it.
Regularly clean the ventilation
slots in your tool using a soft
brush or dry cloth.
Regularly clean the motor
housing using a damp cloth.
Do not use any abrasive or
solvent-based cleaner.
PROTECTING
THE ENVIRONMENT
Tools
Should you find one day that
your tool needs replacement,
or if it is of no further use to
you, think of the protection of
the environment.
Black & Decker repair agents
will accept old Black &
Decker tools and ensure that
they are disposed of in an
environmentally safe way.
Battery (fig. G)
Cd
If you want to dispose of the
tool yourself, the battery
must be removed as
described below and
disposed of in accordance
with local regulations.
Do not short-circuit the
battery terminals. Do not use
tools to remove the battery;
only use your fingers.
Hold the tool as shown in fig. G.
Gently knock the battery
cover against a hard surface
such as a workbench to
loosen the cover.
Remove the cover.
Pull the battery out and
disconnect the wires to
remove it from the tool.
Place the battery in a suitable
packaging to ensure that the
terminals cannot be short-
circuited. Take the battery to
your service agent or a local
recycling station. Collected
batteries will be recycled or
disposed of properly.
KC9036EUR.PM65 25-06-2001, 14:5311
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker kc 9036 ka at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker kc 9036 ka in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Finnish as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info