Manual Black Decker KC 360 H (page 5 of 64) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

78668

Zoom out

Zoom in

1/64

ENGLISH

Generally, a charging time of 4 hours will enable the tool to

operate at an effective power level for most tasks.

However, further charging for up to 8 hours could significantly

increase the run time, depending on the battery and charging

conditions.

◆ Before using the tool, unplug the charger and disconnect

the tool from the charger.

Warning! Do not use the tool while it is connected to the

charger.

Warning! Do not charge the battery at ambient temperatures

below 4 °C or above 40 °C.

Selecting the direction of rotation (fig. C)

For tightening screws, use forward (clockwise) rotation.

For loosening screws use reverse (counterclockwise) rotation.

◆ To select forward rotation, push the forward/reverse

slider (2) to the forward position.

◆ To select reverse rotation, push the forward/reverse slider

(2) to the rearward position.

◆ To lock the tool, set the forward/reverse slider into the

centre position.

Screwdriving (fig. C)

◆ Select forward or reverse rotation using the forward/

reverse slider (2).

◆ To switch the tool on, press the on/off switch switch (1).

◆ To switch the tool off, release the on/off switch (1).

Spindle lock

This tool is fitted with an automatic spindle lock so that it can

be used as a normal screwdriver. Use the tool this way to

loosen very tight screws or to firmly tighten screws.

Hints for optimum use

◆ Always use the correct type and size of screwdriver bit.

◆ If screws are difficult to tighten, try applying a small

amount of washing liquid or soap as a lubricant.

◆ Use the spindle lock to loosen very tight screws or to

firmly tighten screws.

◆ Always hold the tool and screwdriver bit in a straight line

with the screw.

◆ When screwing in wood, it is recommended to drill a pilot

hole with a depth equal to the length of the screw. A pilot

hole guides the screw and prevents splintering or

distortion of the wood. For the optimum size of the pilot

hole, refer to the table below.

◆ When screwing in hardwood, also drill a clearance hole

with a depth equal to half the length of the screw. For the

optimum size of the clearance hole, refer to the table

below.

Screw size Pilot hole ø Pilot hole ø Clearance

(softwood) (hardwood) hole

No. 6 (3.5 mm) 2.0 mm 2.5 mm 4 mm

No. 8 (4 mm) 3.2 mm 3.5 mm 5.0 mm

No. 10 (5 mm) 3.5 mm 4.0 mm 5.7 mm

Accessories

The performance of your tool depends on the accessory used.

Black & Decker and Piranha accessories are engineered to

high quality standards and designed to enhance the performance

of your tool. By using these accessories you will get the very

best from your tool.

This tool uses screwdriver bits with a 1/4" (6.35) hexagonal

shank. Piranha Super-lok accessories are designed for use

with this tool.

Maintenance

Your Black & Decker tool has been designed to operate over a

long period of time with a minimum of maintenance.

Continuous satisfactory operation depends upon proper tool

care and regular cleaning.

Your charger does not require any maintenance apart from

regular cleaning.

Warning! Before performing any maintenance on the tool,

remove the battery from the tool. Unplug the charger before

cleaning it.

◆ Regularly clean the ventilation slots in your tool and

charger using a soft brush or dry cloth.

◆ Regularly clean the motor housing using a damp cloth.

Do not use any abrasive or solvent-based cleaner.

Protecting the environment

Separate collection. This product must not be

disposed of with normal household waste.

Should you find one day that your Black & Decker product

needs replacement, or if it is of no further use to you, do not

dispose of it with household waste. Make this product

available for separate collection.

Separate collection of used products and packaging

allows materials to be recycled and used again.

Re-use of recycled materials helps prevent

environmental pollution and reduces the demand

for raw materials.

This drill does not show how to charge or replace the battery? Submitted on 30-11-2021 at 12:23
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker KC 360 H in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker KC 360 H Manual

Product: