Manual Black Decker KC 360 H (page 4 of 64) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

78668

Zoom out

Zoom in

1/64

ENGLISH

g. Use the power tool, accessories and tool bits etc.,

in accordance with these instructions and in the

manner intended for the particular type of power

tool, taking into account the working conditions

and the work to be performed. Use of the power tool

for operations different from those intended could result

in a hazardous situation.

5. Battery tool use and care

a. Ensure the switch is in the off position before

inserting battery pack. Inserting the battery pack into

power tools that have the switch on invites accidents.

b. Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type of

battery pack may create a risk of fire when used with

another battery pack.

c. Use power tools only with specifically designated

battery packs. Use of any other battery packs may

create a risk of injury and fire.

d. When battery pack is not in use, keep it away from

other metal objects like paper clips, coins, keys,

nails, screws, or other small metal objects that can

make a connection from one terminal to another.

Shorting the battery terminals together may cause burns

or a fire.

e. Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally

occurs, flush with water. If liquid contacts eyes,

additionally seek medical help. Liquid ejected from

the battery may cause irritation or burns.

6. Service

a. Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

Additional safety instructions for batteries and chargers

Batteries

◆ Never attempt to open for any reason.

◆ Do not expose the battery to water.

◆ Do not store in locations where the temperature may

exceed 40 °C.

◆ Charge only at ambient temperatures between 4 °C and

40 °C.

◆ Charge only using the charger provided with the tool.

◆ When disposing of batteries, follow the instructions given

in the section “Protecting the environment”.

◆ Do not incinerate the battery.

◆ Do not attempt to charge damaged batteries.

Chargers

◆ Use your Black & Decker charger only to charge the

battery in the tool with which it was supplied.

Other batteries could burst, causing personal injury and

damage.

◆ Never attempt to charge non-rechargeable batteries.

◆ Have defective cords replaced immediately.

◆ Do not expose the charger to water.

◆ Do not open the charger.

◆ Do not probe the charger.

The charger is intended for indoor use only.

Electrical safety

Your charger is double insulated; therefore no earth

wire is required. Always check that the mains

voltage corresponds to the voltage on the rating

plate. Never attempt to replace the charger unit with

a regular mains plug.

Overview

1. On/off switch

2. Forward/reverse slider

3. Bit holder

Fig A

4. Charger

5. Charger connector

6. Charging base

7. Charging indicator

Assembly

Fitting and removing a screwdriver bit (fig. B)

This tool uses screwdriver bits with a 1/4" (6.35) hexagonal

shank.

◆ To fit a bit, insert the bit shaft into the bit holder (3).

◆ To remove a bit, pull the bit shaft out of the bit holder (3).

Use

◆ Before first use, the battery must be charged for at least

16 hours.

◆ Place the tool on the charging base (6) whenever it is not

in use.

Charging the battery (fig. A)

◆ Place the tool on the charging base (6).

◆ Insert the connector (5) into the charging base.

◆ Plug in the charger (4).

◆ Leave the tool connected to the charger for 7 - 8 hours.

The charger may hum and become warm while charging;

this is normal and does not indicate a problem.

This drill does not show how to charge or replace the battery? Submitted on 30-11-2021 at 12:23
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker KC 360 H in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker KC 360 H Manual

Product: