382774

Black Decker kc 1440 sk Manual

6
Zoom out
Zoom in
Previous page
1/12
Next page
6
ENGLISH
20. Outer washer
21. Inner washer
22. Allen key
SAFETY WARNING
Your saw is designed for use with wood cutting blades
only. Do not use stone cutting or metal cutting discs.
PREPARING YOUR CIRCULAR SAW
SETTING THE DEPTH OF CUT ADJUSTMENT
Proceed as follows:
Loosen the depth of cut adjustment (16) at the bottom of
the scale. Move your circular saw up the scale until the
desired depth of cut is indicated on the scale (18).
Tighten the screw (16). The depth of cut should be 3mm
greater than the thickness of the workpiece.
SETTING THE SIGHT GUIDANCE SYSTEM
The window and ‘sight guide’ are designed to enable
accurate cutting everytime the saw is used.
To prepare the guide system for first time use,
proceed as follows:
Mark a straight line on
your workpiece to
represent the desired
path of the saw blade.
Whilst viewing through
the saw guard window
align the saw blade
teeth with the intended
line of cut drawn on the
workpiece.
Whilst keeping the saw
in this position, place the
orange ‘sight guide’ (13)
onto the shoe of your
circular saw. Align the
‘sight guide’ with the line
drawn on the workpiece
and secure in place with the screw provided.
• At the start of every cut align the blade as described
and whilst cutting keep the ‘sight guide’ in line with
the intended line of cut drawn on the workpiece.
• When attempting mitre cuts, follow the same
procedure detailed above, however, use the area
marked 45˚ on the ‘sight guide’.
SETTING THE MITRING ADJUSTMENT
Your circular saw can cut at angles up to 45˚. To adjust
the angle of your circular saw, proceed as follows:
Loosen the locking
screw (12). Move your
circular saw around the
mitre scale (11) until the
desired angle is
indicated. Tighten the
locking screw (12).
CHANGING THE BLADE
Proceed as follows:
Disconnect the Battery pack and Retract the blade
guard (6). Insert a
screwdriver through the
hole in the
blade to prevent rotation
of the blade.
27 9 8
1
16
18
3
4
19
20
21
17 6 5
10
11
12
20
13
14
15
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker kc 1440 sk at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker kc 1440 sk in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info