501662
10
Zoom out
Zoom in
Previous page
1/120
Next page
10
ENGLISH
Autoselect
®
dial application chart
Automatic brake system (ABS)
This tool has an automatic brake system. When the tool is
not on the work surface, this feature keeps the speed of the
disc below the speed of the motor. When the tool is switched
off, the disc will stop very quickly.
Emptying the dust canister (fig. P & Q)
The dust canister (9) should be emptied after every ten
minutes of use.
Pull the dust canister (9) to the rear and off the tool.
Remove the cover (24) by twisting it counter clockwise.
Hold the dust canister (9) with the filter (25) facing down
and shake the canister to empty the contents. Shake the
cover (24) to empty the contents.
Refit the cover (24) onto the dust canister, twisting it
clockwise until it locks into place.
Refit the dust canister (9) onto the tool.
Cleaning the dust canister filter
The dust canister filter is re-usable and should be cleaned
regularly.
Empty the dust canister (9) as described above.
Pull the filter (25) off the dust canister.
Shake off excess dust by tapping the filter into a dustbin.
Warning! Do not brush or use compressed air or sharp
objects to clean the filter. Do not wash the filter.
Replace the filter (25).
Refit the cover (24).
Refit the dust canister (9) onto the tool.
Accessories
The accessories supplied with your sander depend upon the model that you have purchased. All the accessories listed below
are available in our Piranha
®
range. If you require an accessory that is listed below but is not supplied with your sander please
visit our website at www.blackanddecker.eu.
Setting Application Recommended base Base colour Speed setting
Small area sanding.
Allows you to easily get into tight
areas
Detail finger attachment Orange (1) Low
Large sanding.
Allows you to get up to the edge
of a 90° angle
Large detail base, tip facing
forward
Blue (1) Low
Flush sanding.
Allows you to get up to the edge
of a 90° angle
Flush sanding base,
90° edge facing forward.
Blue (2) High
Large area sanding.
Allows you to remove the most
amount of paint quickly.
Random orbit base Green (2) High
Item Description Purpose
Large detail sanding base (6). For medium to large areas. The large detail base can be
used to sand into corners and to the edge of the
workpiece.
Random orbit sanding base (5). For large areas. The random orbit base can be used for
curved surfaces and when you need a high-quality finish.
Detail finger (8). For small hard-to-reach areas. The detail finger can be
used for light sanding and for sanding into corners.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker KA280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker KA280 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 16,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info