Manual Black Decker KA280 (page 8 of 120) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish)

501662

Zoom out

Zoom in

1/120

ENGLISH

Features

1. On/off switch

2. Autoselect

dial

3. Base / speed setting indicator

4. Base release button

5. Random orbital sanding base

6. Large detail sanding base

7. Sanding base tip

8. Detail finger attachment

9. Dust canister

Assembly

Warning! Before assembly, make sure that the tool is

switched off and unplugged.

Removing sanding bases (fig. A)

 To remove the sanding base, press the release

button (4) and pull the base (6) from the tool.

Attaching the random orbit sanding base (fig. B)

 Hold the tool and the sanding base (5) facing upwards

as shown in fig. B.

 Align the dust openings (10) in the sanding base with

the dust openings (11) in the tool base.

 Press in on the sanding base until you hear it click into

place.

Fitting sanding sheets (fig. C)

 Hold the tool with the sanding base (5) facing upwards.

 Place the sanding sheet (12) onto the sanding base (5)

making sure that the holes in the sheet line up with the

holes in the base.

Large detail sanding base

With this sanding base, you can use the tool as a detail

sander or a flush sander.

Attaching the large detail sanding base (fig. D & E)

For detail sanding, the pointed end should face forward

(fig. D).

For sanding large areas, the pointed end should face to the

rear (fig. E).

 Attach the sanding base as described above under

"Attaching the random orbit sanding base".

 Press in on the sanding base until you hear it click into

place.

Fitting sanding sheets (fig. F)

 Detach the two diamond-shaped tips (13) from the

sanding sheet (14).

 Hold the tool with the sanding base facing upwards.

 Place the sanding sheet (14) onto the sanding base,

making sure that the holes in the sheet line up with the

holes in the base.

The diamond-shaped tip (15) can be reversed and replaced

when worn.

 When the front part of the tip is worn, detach it from the

sheet, reverse it and press it onto the sanding base

again.

 When the whole tip is worn, remove it from the sanding

base and fit a new diamond shaped tip (13).

Tip of the sanding base (fig. G)

When the sanding base tip (7) is worn, it can be reversed

or replaced. When the diamond shaped tip holder (16) is

worn, it can be replaced. Spare parts are available from your

Black & Decker dealer.

 Remove the screw (17).

 Reverse or replace the worn part.

 Fit and tighten the screw (17).

Finger attachment (fig. H)

The finger attachment is used for fine detail sanding.

 Remove the screw (17).

 Remove the diamond-shaped tip holder (16) from the

sanding base.

 Fit the finger attachment (8) onto the sanding base (6).

 Fit and tighten the screw (17).

 Fit the appropriate sanding sheet (18) onto the finger

attachment.

Profile attachment

The profile attachment is used for contour sanding.

Fitting the profile attachment (fig. I)

 Remove the screw (17).

 Remove the diamond-shaped tip holder (16) from the

sanding base.

 Fit the profile attachment (19) onto the sanding base.

 Fit and tighten the screw (17).

Fitting and removing a sanding profile (fig. J & K)

 Choose the sanding profile most suitable for your

application.

 Place one end of the sanding profile (20) into the recess

at the front end of the profile attachment (19).

 Push the other end of the sanding profile until it clicks

into place.

 To remove the sanding profile (20), push it forward and

pull the rear end out of the profile attachment (19).

Fitting a sanding sheet onto a sanding profile (fig. L)

 Align the sanding sheet (21) with the sanding

profile (20).

 Press the sanding sheet onto the sanding profile,

making sure that the sanding sheet follows the shape

of the profile.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker KA280 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 16,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker KA280 Manual

Product: