389571
29
Zoom out
Zoom in
Previous page
1/84
Next page
29
ENGLISH
applying light pressure
making sure that the
paper follows the shape.
Never use your sander
without sandpaper.
REMOVING THE SIDE HANDLE
Proceed as follows:
Turn the handle anti-
clockwise and
unscrew completely.
Remove the
connecting shoulder.
Unclip the metal clip.
ADJUSTING THE SIDE HANDLE
Proceed as follows:
Loosen the handle
slightly. Move the metal
clip around the body of
the sander until the
side handle is in the
desired position.
Tighten the handle.
DUST EXTRACTION SYSTEM
Most of the dust from the work surface is collected in
the dustbag. The extraction fan of your multi sander
draws the dust from the surface through the holes in
the base. The dust then passes through the fan shroud
to the dustbag. You can also use your multi sander with
a vacuum cleaner. A special adaptor is available from
Black & Decker as an accessory.
EMPTYING THE DUSTBAG
Disconnect the plug from the electricity supply.
Hold your multi sander
vertically with the
dustbag facing
downwards. Squeeze
the sides of the
dustbag together,
adjacent to the finger
grips and pull the bag
gently. Empty the
dustbag and replace on
the sander. A click is
heard when the dustbag is correctly fitted. The plastic
baffle is removable. However, it is not necessary to
remove the baffle when emptying the dustbag. Do not
wash the dustbag. Empty the dustbag every 10 minutes.
AUTOMATIC BRAKE SYSTEM (ABS)
(KA200/KA220/KA220E/KA230E)
Your multi sander has an automatic brake system
(ABS). This feature gives you optimal control as it
keeps the speed of the disc below that of the motor
when your sander is not on the work surface. When
your sander is switched off, the disc stops very quickly.
HANDY HINTS
You can hold your
multi sander in various
positions for maximum
comfort but make sure
you do not block the air
intake slots.
Do not apply excessive pressure when you use your
multi sander, especially in the random orbit mode.
Replace the sandpaper when it is worn.
Use high grit sandpaper for a fine finish. As a
general rule, start with coarse grits and gradually
change to the finer grits for the final finish.
When using your multi sander to sand profiles be
sure to keep the profile square to the workpiece.
Smaller radii sanding profiles work better with finer
grit sandpaper.
Ensure that the platen is flat on the work surface
whilst sanding.
EC DECLARATION OF CONFORMITY
We declare that units:
KA200, KA210, KA210E, KA220, KA220E, KA230E
conform to 89/392/EEC, 89/336/EEC, EN55014,
73/23/EEC, EN55104, EN50144
A weighted sound pressure 77.1dB (A)
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker ka 230 ekw at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker ka 230 ekw in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info