389571
28
Zoom out
Zoom in
Previous page
1/84
Next page
28
ENGLISH
the allen key provided. Press the base on firmly when
tightening the screw.
REVERSING THE POINTED BASE
(KA210/KA210E/KA220/KA220E/KA230E)
Proceed as follows:
Disconnect the plug from the electricity supply.
Turn the screw
anticlockwise using the
allen key provided in
the handle. Remove the
screw and the washer
from the spindle. Hold
the base in position
with the point facing
rearwards. Fit the
washer and the screw. Tighten the screw using the
allen key provided. Press the base on firmly when
tightening the screw.
FITTING THE SANDPAPER (POINTED BASE)
Proceed as follows:
Disconnect the plug from the electricity supply.
Detach the two
diamond-shaped tips
from the main sheet.
Place the sandpaper on
the pointed base, making
sure the holes of the
paper and the base are
aligned. Never use your
multi sander without
sandpaper and always
use a full sheet of sandpaper.
TIP COMPONENTS (POINTED BASE)
(KA210/KA210E/KA220 /KA220E/KA230E)
Each sheet of
sandpaper has a
removable tip, with two
spare tips attached. To
obtain maximum use
from each sheet, detach
and turn the tip when the
front part is worn.
When the whole tip is worn, replace it with one of the
spare tips provided. The tip of the backing pad is
removable. When the front part is worn, turn the tip.
When the tip is completely worn, replace the tip. Spare
tips are available as accessories. When the tip of the
hard plastic tip holder is worn, remove the screw and
turn the holder. Spare holders are available as accessories.
FITTING THE PROFILE BASE (KA230E)
Proceed as follows:
Disconnect the plug from the electricity supply.
Position the profile
base on the spindle,
with the long section
pointing towards the
front of your sander.
Make sure the legs fit
into their housings.
Place the washer in
position on the base
and fit the screw using
the allen key provided.
Press the base on
firmly when tightening the screw.
FITTING THE SANDING PROFILE (KA230E)
Proceed as follows:
Disconnect the plug from the electricity supply.
There are six sanding
profiles supplied, each
being different in size
and shape. Select the
sanding profile most
suitable for the task
and push into the slot in
the front of the base.
To do this, first locate
one end of the sanding
profile into the recess
at the back of the
profile base slot, then
push the other end so
that it locates in the
recess in the front of
the profile base. The sanding profile will now be
positively located. The sanding profile can be removed
by depressing the small black square section which is
visible at the front of the profile base, whilst pulling the
profile away from its locating slot.
FITTING THE SANDING PAPER (PROFILE BASE)
(KA230E)
Proceed as follows:
Disconnect the plug from the electricity supply.
With the profile fitted in the base, fit the paper by
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker ka 230 ekw at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker ka 230 ekw in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info