665803
10
Zoom out
Zoom in
Previous page
1/100
Next page
10
ENGLISH
Troubleshooting
If the tool does not operate correctly, check the following.
Fault Possible cause Action
Tool will not start. Battery not installed properly. Check the battery
installation.
Battery discharged. Fit a (fully) charged battery.
Lock-off button not actuated. Observe the starting
procedure.
Pole connections Check the connections.
not properly tightened.
Battery will not charge. Battery not installed properly. Check the battery installation.
Protecting the environment
Z
Separate collection. This product must not be
disposed of with normal household waste.
Should you nd one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
z
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker ofce at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Batteries
Z
Black & Decker batteries can be recharged many
times. At the end of their useful life, discard batteries
with due care for our environment:
u Run the battery down completely, then remove it from the
tool.
u NiCd, NiMH and Li-Ion batteries are recyclable. Take them
to any authorised repair agent or a local recycling station.
Technical data
GTC800 (H1)/GTC800P (H1)/
GTC800NM (H1)
Voltage V
DC
18
Blade strokes (no load) min
-1
2,400
Blade length cm 43
Blade gap mm 12
Blade brake time s < 1.0
Weight (without battery) kg 3.2
Battery
Voltage V
DC
18
Capacity Ah 1.5
Weight kg 0.45
Charger 3 hr 1 hr
Input voltage V
AC
230 230
Approx. charging time h 3 1
Weight kg 0.4 1.2
Level of sound pressure, measured according to 2000/14/EC:
L
pA
(sound pressure) 82 dB(A), Uncertainty (K) 3dB(A)
L
WA
(sound power) 93 dB(A), Uncertainty (K) 3dB(A)
L
WA
(guaranteed) 95 dB(A), Uncertainty (K) 3dB(A)
Hand/arm weighted vibration value according
to EN 50144: < 2.5 m/s
2,
Uncertainty (K) 1.5 m/s
2,
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker GTC800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GTC800 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info