665803

Black Decker GTC800 Manual

9
Zoom out
Zoom in
Previous page
1/100
Next page
9
ENGLISH
Do not force. Be sure that the battery is fully seated in the
charger.
u Plug in the charger.
3 hour charger
The battery will be fully charged in approx. 3 hours. It can be
removed at any time or left in the connected charger indenitely.
1 hour charger
Check if the red charging indicator (9) lights up. If the green
end of charge indicator (10) lights up now instead, the battery
is too hot and cannot be charged. If this happens, remove the
battery from the charger, let the battery cool down for approx.
1 hour and re-insert it.
After approx. 1 hour of charging, the red charging indicator will
stop lighting and the green end of charge indicator will light
up. The battery is now fully charged.
u Remove the battery from the charger.
Switchingonandoff(g.E)
For your safety, this tool is equipped with a double switching
system. This system prevents starting the tool inadvertently.
Switching on
u Push the lock-off button (2) backward using your thumb
and at the same time squeeze the on/off switch (1).
u Release the lock-off button (2).
Switching off
u Release the on/off switch (1).
Warning! Never attempt to lock a switch in the on position.
Hintsforoptimumuse(g.F1-F2)
u Start by trimming the top of the hedge. Slightly tilt the tool
(up to 15° relative to the line of cut) so that the blade tips
point slightly towards the hedge (g. F1). This will cause
the blades to cut more effectively. Hold the tool at the
desired angle and move it steadily along the line of cut.
The double-sided blade allows you to cut in either
direction.
u In order to obtain a very straight cut, stretch a piece of
string along the length of the hedge at the desired height.
Use the string as a guideline, cutting just above it.
u In order to obtain at sides, cut upwards with the growth.
Younger stems move outwards when the blade cuts
downwards, causing shallow patches in the hedge (g. F2).
u Take care to avoid any foreign objects. Especially avoid
hard objects such as metal wire and railings, as these
could damage the blades.
u Regularly oil the blades.
Guidelines for trimming (UK & Ireland)
u Trim hedges and shrubs with seasonal leaves (new leaves
every year) in June and October.
u Trim evergreens in April and August.
u Trim conifers and other fast growing shrubs every six
weeks from May until October.
Guidelines for trimming (Australia & New Zealand)
u Trim hedges and shrubs with seasonal leaves (new leaves
every year) in December and March.
u Trim evergreens in September and February.
u Trim conifers and other fast growing shrubs every six
weeks from October until March.
Cleaning, maintenance and storage
Your Black & Decker tool has been designed to operate over a
long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger before
cleaning it.
After use and before storage
u After use, carefully clean the blades. After cleaning, apply
a lm of light machine oil to prevent the blades from
rusting.
u Regularly clean the ventilation slots in your tool using
a soft brush or dry cloth.
u Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
u Make sure all switches are free of debris before and after
use.
Storage
When the tool will not be used for several months, ideally
leave the battery connected to the charger.
Otherwise proceed as follows:
u Fully charge the battery.
u Remove the battery from the tool.
u Store the tool and battery in a secure and dry location.
The storage temperature must always remain in the range
of +5 °C to +40 °C. Place the battery on a level surface.
u Before using the tool after prolonged storage, fully charge
the battery again.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker GTC800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GTC800 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info